21.01.2015 |
404compliant
GalaCon Volunteer-Stratege
Carrot Not Found
Beiträge: 8.345
Registriert seit: 23. Okt 2011
|
RE: Von Windows auf Linux - die Umsteiger
fglrx meide ich, erstens mag ich mein System nicht durch unfreie Blob-Treiber gefährden, zweitens haben die meine Grafikkarte längst zu Elektroschrott erklärt. Sowohl die im PC, als auch die im Notebook.
Der xorg-radeon funktioniert dagegen von selbst. Auflösung wird automatisch erkannt. Einzustellen gibts da normalerweise nichts.
Falls der fglrx so frei war, dein System mit einer ungeeigneten /etc/X11/xorg.conf zuzumüllen, die vielleicht mal löschen/umbenennen.
Andernfalls mal /var/log/Xorg.0.log inspizieren, Zeilen mit (EE) sind schwerwiegende Fehler.
|
|
|
21.01.2015 |
404compliant
GalaCon Volunteer-Stratege
Carrot Not Found
Beiträge: 8.345
Registriert seit: 23. Okt 2011
|
RE: Von Windows auf Linux - die Umsteiger
(21.01.2015)Crash Override schrieb: So. Nun wirds sehr Interessant: /etc/X11/xorg.conf Existiert nichtmal. Na dann...
Ist ok, braucht man heutzutage normalerweise nicht mehr, so erledigt das der Autodetect. Bei fglrx und seiner gewachsenen Altlast-Struktur war ich nur nicht sicher, ob nicht irgend ein Konfig-Tool eine generiert hat, die dann das Laden anderer Treiber verhindert.
|
|
|
21.01.2015 |
Crash Override
Faust
Beiträge: 14.545
Registriert seit: 10. Feb 2013
|
RE: Von Windows auf Linux - die Umsteiger
So - nu weiß ich was los is. Funktionieren tut kein Treiber - weil die X1400 "zu alt ist". Ergo: Bis auf die standardtreiber geht nix. Daher ist auch kein fglrx installiert (egal wie ich es dennoch versuche). Heisst also: Meine T60 sind für Ubuntu zu alt, so dass ich die beiden gradewegs "entsorgen" kann... meh.
Werde dann wohl oder übel auf X201 & T400 umsteigen müssen, damit ich wenigstens noch unterstützung für die Grafikchips erhalte. So'n schiet...
Traditional Avatar by Darksittich
|
|
|
22.01.2015 |
404compliant
GalaCon Volunteer-Stratege
Carrot Not Found
Beiträge: 8.345
Registriert seit: 23. Okt 2011
|
RE: Von Windows auf Linux - die Umsteiger
(21.01.2015)Crash Override schrieb: So - nu weiß ich was los is. Funktionieren tut kein Treiber - weil die X1400 "zu alt ist".
Also das ist Quark. Die X1400 müsste zur Radeon R500 Serie gehören (RV515?), und wird selbstverständlich vom xorg radeon Treiber unterstützt. Mein Notebook hat auch nur einen RV530-Chip (aka. FireGL 5200), und funktioniert einwandfrei, inklusive 3D- und Video-Beschleunigung.
AMD's fglrx-Treiber gibt es dagegen schon seit 5 Jahren nicht mehr für den Chip.
(Dieser Beitrag wurde zuletzt bearbeitet: 22.01.2015 von 404compliant.)
|
|
|
22.01.2015 |
Crash Override
Faust
Beiträge: 14.545
Registriert seit: 10. Feb 2013
|
RE: Von Windows auf Linux - die Umsteiger
Ja, Rv515. Das Problem ist, dass ich auch woanders nachgefragt hatte - und dort eben die Antwort (und zu überzeugende antworten dahingehend) bekam.
Zwar sieht der Link hoffnungsbereitend aus - aber ganz ehrlich: Ich hab nicht den blassesten Schimmer was ich damit anfangen soll. Selbst unter "repo info" seh ich weder ne Installationsanleitung noch eine Repository, die ich per "sudo" anhängen kann. So schnell wie es für mich bergauf ging als ich das las - so schnell ging's auch wieder herab... Ich hab mich inzwischen zwar mit dem Terminal angefreundet (so oft wie ich da jetzt drin hing), aber dennoch bin ich bisher nicht wirklich viel weiter als am anfang...
TP-Forum
Wie man da sehen kann, hatte ich nach langer suche geschaut was machbar ist, aber kam zu keiner Lösung, die einfach wäre. Daher hab ich dort nachgefragt, wo man sich mit den Thinkpads am besten auskennt - im TP-forum, in dem ich auch schon länger registriert bin. Man kan ja sehen was da lief...
Hier die Problembeschreibung aus dem MLK-Forum. Da kam ich auch nicht wirklich weiter...
Traditional Avatar by Darksittich
(Dieser Beitrag wurde zuletzt bearbeitet: 22.01.2015 von Crash Override.)
|
|
|
22.01.2015 |
404compliant
GalaCon Volunteer-Stratege
Carrot Not Found
Beiträge: 8.345
Registriert seit: 23. Okt 2011
|
RE: Von Windows auf Linux - die Umsteiger
Bei mir – Debian, du weißt schon, die Distribution, bei der alles immer extra kompliziert ist – genügt es, xserver-xorg-video-all zu installieren (eventuell braucht er noch firmware-linux-free und/oder firmware-linux-nonfree), und danach funktioniert alles automatisch, kein gefrickel mit irgend welchen config-Programmen.
Wenn gar keine X-Oberfläche startet, gib uns mal die xorg.0.log, und eventuell die Ausgabe von dmesg oder dem syslog, falls es schon Fehler beim booten gibt.
Wenn X läuft, kann man noch mal nach OpenGL schauen. glxgears ausprobieren – bei mir glatt 60fps, glxinfo für Diagnoseausgaben, etc.
Was generell nicht besser werden kann: Der Chip kann nur OpenGL 2.1 , falls dein Programm mehr braucht, hast du pech.
EDIT:
Für 3D-Unterstützung brauchst du noch die DRM-Treiber, such mal nach libdrm-radeon, und die (OpenGL) Mesa GLX-Treiber. (libgl1-mesa-glx)
Nur für den Fall, dass deine fglrx-Versuche da ein paar Bibliotheken verdrängt haben.
(Dieser Beitrag wurde zuletzt bearbeitet: 22.01.2015 von 404compliant.)
|
|
|
22.01.2015 |
Crash Override
Faust
Beiträge: 14.545
Registriert seit: 10. Feb 2013
|
RE: Von Windows auf Linux - die Umsteiger
xorg.0.log existiert nicht. Ich bekomme da keine ausgabe von - hatte ich aber schonmal erwähnt...
Code:
crash@crash-ThinkPad-T60:~$ /var/log/Xorg.0.log
bash: /var/log/Xorg.0.log: Keine Berechtigung
crash@crash-ThinkPad-T60:~$
Mit sudo davor bringt's nix, weil er den Befehl nicht findet.
Beim Booten gibt's keine Fehler (mehr), aber ich denk mal, ich hab da was, was vielleicht interressant sein könnte:
Code:
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.265376] Freeing unused kernel memory: 872K (c19b9000 - c1a930
00)
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.265460] Write protecting the kernel text: 6544k
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.265581] Write protecting the kernel read-only data: 2768k
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.265583] NX-protecting the kernel data: 5744k
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.282646] systemd-udevd[104]: starting version 204
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.318790] ACPI: Video Device [VID1] (multi-head: yes rom: no
post: no)
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.321286] acpi device:06: registered as cooling_device2
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.321386] input: Video Bus as /devices/LNXSYSTM:00/device:00/PN
P0A08:00/device:05/LNXVIDEO:01/input/input5
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.357713] pps_core: LinuxPPS API ver. 1 registered
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.357717] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 R
odolfo Giometti <giometti@linux.it>
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.366059] PTP clock support registered
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.423201] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.423206] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.423803] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/
sec) set to dynamic conservative mode
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.423862] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.424170] [drm] Initialized drm 1.1.0 20060810
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.533721] [drm] radeon kernel modesetting enabled.
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.534029] [drm] initializing kernel modesetting (RV515 0x1002:0
x7145 0x17AA:0x2006).
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.534047] [drm] register mmio base: 0xEE100000
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.534049] [drm] register mmio size: 65536
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.534190] ATOM BIOS: M64CSP/M62CSP/M54CSP/M52CSP
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.534210] [drm] Generation 2 PCI interface, using max accessibl
e memory
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.534217] radeon 0000:01:00.0: VRAM: 128M 0x0000000000000000 -
0x0000000007FFFFFF (128M used)
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.534221] radeon 0000:01:00.0: GTT: 512M 0x0000000008000000 - 0
x0000000027FFFFFF
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.537308] [drm] Detected VRAM RAM=128M, BAR=128M
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.537313] [drm] RAM width 128bits DDR
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.537847] e1000e 0000:02:00.0 eth0: (PCI Express:2.5GT/s:Width
x1) 00:16:41:e0:bb:78
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.537851] e1000e 0000:02:00.0 eth0: Intel(R) PRO/1000 Network C
onnection
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.537929] e1000e 0000:02:00.0 eth0: MAC: 2, PHY: 2, PBA No: 005
301-003
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.538233] [TTM] Zone kernel: Available graphics memory: 435138
kiB
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.538236] [TTM] Zone highmem: Available graphics memory: 155069
4 kiB
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.538238] [TTM] Initializing pool allocator
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.538254] [TTM] Initializing DMA pool allocator
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.538282] [drm] radeon: 128M of VRAM memory ready
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.538284] [drm] radeon: 512M of GTT memory ready.
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.538452] [drm] GART: num cpu pages 131072, num gpu pages 13107
2
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.556911] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.558356] [drm] PCIE GART of 512M enabled (table at 0x000000000
0040000).
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.558380] radeon 0000:01:00.0: WB enabled
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.558386] radeon 0000:01:00.0: fence driver on ring 0 use gpu a
ddr 0x0000000008000000 and cpu addr 0xffc1d000
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.558389] [drm] Supports vblank timestamp caching Rev 2 (21.10.
2013).
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.558391] [drm] Driver supports precise vblank timestamp query.
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.558404] [drm] radeon: irq initialized.
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.558426] [drm] Loading R500 Microcode
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.558682] [drm] radeon: ring at 0x0000000008001000
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.558723] [drm] ring test succeeded in 11 usecs
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.558924] [drm] ib test succeeded in 0 usecs
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.564062] [drm] radeon atom DIG backlight initialized
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.564066] [drm] Radeon Display Connectors
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.564068] [drm] Connector 0:
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.564070] [drm] VGA-1
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.564073] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e4
8 0x7e4c 0x7e4c
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.564075] [drm] Encoders:
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.564077] [drm] CRT1: INTERNAL_KLDSCP_DAC1
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.564079] [drm] Connector 1:
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.564081] [drm] LVDS-1
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.564083] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e6
8 0x7e6c 0x7e6c
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.564085] [drm] Encoders:
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.564087] [drm] LCD1: INTERNAL_LVTM1
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.564089] [drm] Connector 2:
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.564091] [drm] DVI-I-1
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.564092] [drm] HPD1
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.564095] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e5
8 0x7e5c 0x7e5c
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.564097] [drm] Encoders:
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.564098] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.564120] [drm] radeon: power management initialized
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.919548] [drm] fb mappable at 0xD80C0000
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.919552] [drm] vram apper at 0xD8000000
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.919553] [drm] size 3145728
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.919555] [drm] fb depth is 24
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.919557] [drm] pitch is 4096
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 2.919673] fbcon: radeondrmfb (fb0) is primary device
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 3.036197] Console: switching to colour frame buffer device 128x48
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 3.040305] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 3.040308] radeon 0000:01:00.0: registered panic notifier
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 3.040324] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 3.104052] usb 5-1: new full-speed USB device number 2 using uhci_hcd
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 5.762785] type=1400 audit(1421836553.107:4): apparmor="STATUS"
operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=481 comm="apparmor_parser"
Jan 21 11:35:53 crash-ThinkPad-T60 rsyslogd-2039: Could no open output pipe '/dev/xconsole': No such file or di
rectory [try http://www.rsyslog.com/e/2039 ]
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 6.095665] ACPI Warning: 0x00001028-0x0000102f SystemIO conflict
s with Region \_SB_.PCI0.LPC_.PMIO 1 (20131115/utaddress-251)
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 6.095677] ACPI: If an ACPI driver is available for this device,
you should use it instead of the native driver
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 6.095682] ACPI Warning: 0x000011b0-0x000011bf SystemIO conflict
s with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251)
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 6.095687] ACPI: If an ACPI driver is available for this device,
you should use it instead of the native driver
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 6.095689] ACPI Warning: 0x00001180-0x000011af SystemIO conflict
s with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251)
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 6.095694] ACPI: If an ACPI driver is available for this device,
you should use it instead of the native driver
Jan 21 11:35:53 crash-ThinkPad-T60 kernel: [ 6.095697] lpc_ich: Resource conflict(s) found affecting gpio_ic
h
Code:
crash@crash-ThinkPad-T60:~$ modinfo -p radeon
no_wb:Disable AGP writeback for scratch registers (int)
modeset:Disable/Enable modesetting (int)
dynclks:Disable/Enable dynamic clocks (int)
r4xx_atom:Enable ATOMBIOS modesetting for R4xx (int)
vramlimit:Restrict VRAM for testing (int)
agpmode:AGP Mode (-1 == PCI) (int)
gartsize:Size of PCIE/IGP gart to setup in megabytes (32, 64, etc., -1 = auto) (int)
benchmark:Run benchmark (int)
test:Run tests (int)
connector_table:Force connector table (int)
tv:TV enable (0 = disable) (int)
audio:Audio enable (-1 = auto, 0 = disable, 1 = enable) (int)
disp_priority:Display Priority (0 = auto, 1 = normal, 2 = high) (int)
hw_i2c:hw i2c engine enable (0 = disable) (int)
pcie_gen2:PCIE Gen2 mode (-1 = auto, 0 = disable, 1 = enable) (int)
msi:MSI support (1 = enable, 0 = disable, -1 = auto) (int)
lockup_timeout:GPU lockup timeout in ms (defaul 10000 = 10 seconds, 0 = disable) (int)
fastfb:Direct FB access for IGP chips (0 = disable, 1 = enable) (int)
dpm:DPM support (1 = enable, 0 = disable, -1 = auto) (int)
aspm:ASPM support (1 = enable, 0 = disable, -1 = auto) (int)
runpm:PX runtime pm (1 = force enable, 0 = disable, -1 = PX only default) (int)
bapm:BAPM support (1 = enable, 0 = disable, -1 = auto) (int)
crash@crash-ThinkPad-T60:~$
crash@crash-ThinkPad-T60:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-44-generic (buildd@komainu) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #73-Ubuntu SMP Tue Dec 16 00:23:46 UTC 2014 (Ubuntu 3.13.0-44.73-generic 3.13.11-ckt12)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfecffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfed0000-0x00000000bfedefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfedf000-0x00000000bfefffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bff00000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: LENOVO 200763G/200763G, BIOS 79ETE7WW (2.27 ) 03/21/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xbfed0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3071MB, range: 1MB, type UC
[ 0.000000] total RAM covered: 3071M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3071MB, range: 1MB, type UC
[ 0.000000] found SMP MP-table at [mem 0x000f6810-0x000f681f] mapped at [c00f6810]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[ 0.000000] [mem 0x37800000-0x379fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff]
[ 0.000000] [mem 0x34000000-0x377fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] BRK [0x01b96000, 0x01b96fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35182000-0x368b8fff]
[ 0.000000] ACPI: RSDP 000f67e0 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT bfed14a0 00008C (v01 LENOVO TP-79 00002270 LTP 00000000)
[ 0.000000] ACPI: FACP bfed1600 0000F4 (v03 LENOVO TP-79 00002270 LNVO 00000001)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 0/32 (20131115/tbfadt-572)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20131115/tbfadt-603)
[ 0.000000] ACPI: DSDT bfed195e 00D467 (v01 LENOVO TP-79 00002270 MSFT 0100000E)
[ 0.000000] ACPI: FACS bfef4000 000040
[ 0.000000] ACPI: SSDT bfed17b4 0001AA (v01 LENOVO TP-79 00002270 MSFT 0100000E)
[ 0.000000] ACPI: ECDT bfededc5 000052 (v01 LENOVO TP-79 00002270 LNVO 00000001)
[ 0.000000] ACPI: TCPA bfedee17 000032 (v02 LENOVO TP-79 00002270 LNVO 00000001)
[ 0.000000] ACPI: APIC bfedee49 000068 (v01 LENOVO TP-79 00002270 LNVO 00000001)
[ 0.000000] ACPI: MCFG bfedeeb1 00003C (v01 LENOVO TP-79 00002270 LNVO 00000001)
[ 0.000000] ACPI: HPET bfedeeed 000038 (v01 LENOVO TP-79 00002270 LNVO 00000001)
[ 0.000000] ACPI: BOOT bfedefd8 000028 (v01 LENOVO TP-79 00002270 LTP 00000001)
[ 0.000000] ACPI: SSDT bfef2697 00025F (v01 LENOVO TP-79 00002270 INTL 20050513)
[ 0.000000] ACPI: SSDT bfef28f6 0000A6 (v01 LENOVO TP-79 00002270 INTL 20050513)
[ 0.000000] ACPI: SSDT bfef299c 0004F7 (v01 LENOVO TP-79 00002270 INTL 20050513)
[ 0.000000] ACPI: SSDT bfef2e93 0008BD (v01 LENOVO TP-79 00002270 INTL 20050513)
[ 0.000000] ACPI: SSDT bfef3750 00069C (v01 LENOVO TP-79 00002270 INTL 20050513)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2178MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] BRK [0x01b97000, 0x01b97fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0xbfecffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xbfecffff]
[ 0.000000] On node 0 totalpages: 786030
[ 0.000000] free_area_init_node: node 0, pgdat c199d580, node_mem_map f3982020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 224254 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4358 pages used for memmap
[ 0.000000] HighMem zone: 557778 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000dc000-0x000fffff]
[ 0.000000] e820: [mem 0xc0000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bd0000 s36096 r0 d21248 u57344
[ 0.000000] pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 784246
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-44-generic root=UUID=4f486a92-492a-4e7d-bfbc-768ed730c69e ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 6289016 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:000bfed0)
[ 0.000000] Memory: 3076700K/3144120K available (6547K kernel code, 640K rwdata, 2764K rodata, 876K init, 924K bss, 67420K reserved, 2231112K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc19bb000 - 0xc1a96000 ( 876 kB)
[ 0.000000] .data : 0xc1664ff4 - 0xc19ba3c0 (3412 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1664ff4 (6547 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f7008000 soft=f700a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1995.042 MHz processor
[ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.08 BogoMIPS (lpj=7980168)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004046] Security Framework initialized
[ 0.004071] AppArmor: AppArmor initialized
[ 0.004074] Yama: becoming mindful.
[ 0.004161] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004165] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004494] Initializing cgroup subsys memory
[ 0.004505] Initializing cgroup subsys devices
[ 0.004508] Initializing cgroup subsys freezer
[ 0.004512] Initializing cgroup subsys blkio
[ 0.004515] Initializing cgroup subsys perf_event
[ 0.004519] Initializing cgroup subsys hugetlb
[ 0.004551] Disabled fast string operations
[ 0.004557] CPU: Physical Processor ID: 0
[ 0.004560] CPU: Processor Core ID: 0
[ 0.004564] mce: CPU supports 6 MCE banks
[ 0.004574] CPU0: Thermal monitoring enabled (TM2)
[ 0.004588] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[ 0.004588] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
[ 0.004588] tlb_flushall_shift: 6
[ 0.005049] Freeing SMP alternatives memory: 32K (c1a96000 - c1a9e000)
[ 0.008043] ACPI: Core revision 20131115
[ 0.022532] ACPI: All ACPI Tables successfully acquired
[ 0.024012] ftrace: allocating 27841 entries in 55 pages
[ 0.036120] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.040201] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.079897] smpboot: CPU0: Intel® Core Duo CPU T2500 @ 2.00GHz (fam: 06, model: 0e, stepping: 0c)
[ 0.080000] Performance Events: Core events, core PMU driver.
[ 0.080000] ... version: 1
[ 0.080000] ... bit width: 40
[ 0.080000] ... generic registers: 2
[ 0.080000] ... value mask: 000000ffffffffff
[ 0.080000] ... max period: 000000007fffffff
[ 0.080000] ... fixed-purpose events: 0
[ 0.080000] ... event mask: 0000000000000003
[ 0.080000] CPU 1 irqstacks, hard=f70ec000 soft=f70ee000
[ 0.080000] x86: Booting SMP configuration:
[ 0.008000] Initializing CPU#1
[ 0.008000] Disabled fast string operations
[ 0.089506] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.080000] .... node #0, CPUs: #1
[ 0.091546] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.091549] Measured 568800 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.091551] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[ 0.091596] x86: Booted up 1 node, 2 CPUs
[ 0.091599] smpboot: Total of 2 processors activated (7980.16 BogoMIPS)
[ 0.092145] devtmpfs: initialized
[ 0.092312] EVM: security.selinux
[ 0.092315] EVM: security.SMACK64
[ 0.092317] EVM: security.ima
[ 0.092319] EVM: security.capability
[ 0.092354] PM: Registering ACPI NVS region [mem 0xbfedf000-0xbfefffff] (135168 bytes)
[ 0.093641] pinctrl core: initialized pinctrl subsystem
[ 0.093749] regulator-dummy: no parameters
[ 0.093793] RTC time: 10:37:23, date: 01/22/15
[ 0.093850] NET: Registered protocol family 16
[ 0.093850] EISA bus registered
[ 0.093850] cpuidle: using governor ladder
[ 0.093850] cpuidle: using governor menu
[ 0.093850] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.093850] ACPI: bus type PCI registered
[ 0.093850] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.093850] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.093850] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.093850] PCI: Using MMCONFIG for extended config space
[ 0.093850] PCI: Using configuration type 1 for base access
[ 0.096087] bio: create slab <bio-0> at 0
[ 0.096131] ACPI: Added _OSI(Module Device)
[ 0.096134] ACPI: Added _OSI(Processor Device)
[ 0.096137] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.096139] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.097262] ACPI : EC: EC description table is found, configuring boot EC
[ 0.112529] ACPI: SSDT bfef1d36 000282 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
[ 0.113308] ACPI: Dynamic OEM Table Load:
[ 0.113312] ACPI: SSDT (null) 000282 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
[ 0.113473] ACPI: SSDT bfef203d 00065A (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
[ 0.114280] ACPI: Dynamic OEM Table Load:
[ 0.114283] ACPI: SSDT (null) 00065A (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
[ 0.124267] ACPI: SSDT bfef1c6e 0000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
[ 0.125039] ACPI: Dynamic OEM Table Load:
[ 0.125042] ACPI: SSDT (null) 0000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
[ 0.125135] ACPI: SSDT bfef1fb8 000085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
[ 0.125896] ACPI: Dynamic OEM Table Load:
[ 0.125899] ACPI: SSDT (null) 000085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
[ 0.136274] ACPI: Interpreter enabled
[ 0.136286] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.136292] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.136310] ACPI: (supports S0 S3 S4 S5)
[ 0.136312] ACPI: Using IOAPIC for interrupt routing
[ 0.136345] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.137296] ACPI: ACPI Dock Station Driver: 4 docks/bays found
[ 0.142337] ACPI: Power Resource [PUBS] (on)
[ 0.149221] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.149366] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.149508] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.149651] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.149793] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.149935] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.150077] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.150220] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.150307] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.150315] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.152033] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.152072] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.152317] PCI host bridge to bus 0000:00
[ 0.152322] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.152325] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.152329] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.152332] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.152335] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.152339] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.152342] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[ 0.152345] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff]
[ 0.152358] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[ 0.152487] pci 0000:00:01.0: [8086:27a1] type 01 class 0x060400
[ 0.152540] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.152693] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.152718] pci 0000:00:1b.0: reg 0x10: [mem 0xee400000-0xee403fff 64bit]
[ 0.152824] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.152903] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.152959] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.153070] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.153141] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.153194] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.153305] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.153375] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.153430] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[ 0.153542] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.153612] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.153668] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[ 0.153779] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.153849] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.153903] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.153961] pci 0000:00:1d.0: reg 0x20: [io 0x1800-0x181f]
[ 0.154138] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.154138] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.154138] pci 0000:00:1d.1: reg 0x20: [io 0x1820-0x183f]
[ 0.154138] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.154138] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.154138] pci 0000:00:1d.2: reg 0x20: [io 0x1840-0x185f]
[ 0.154138] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.154138] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.154138] pci 0000:00:1d.3: reg 0x20: [io 0x1860-0x187f]
[ 0.154138] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.154138] pci 0000:00:1d.7: reg 0x10: [mem 0xee404000-0xee4043ff]
[ 0.154138] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.154138] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.154138] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.154138] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.154138] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[ 0.154138] pci 0000:00:1f.0: address space collision: [io 0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000]
[ 0.154138] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.154138] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[ 0.154138] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[ 0.154138] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
[ 0.156054] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x010180
[ 0.156076] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
[ 0.156089] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
[ 0.156102] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
[ 0.156115] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
[ 0.156129] pci 0000:00:1f.2: reg 0x20: [io 0x18b0-0x18bf]
[ 0.156187] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.156290] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.156365] pci 0000:00:1f.3: reg 0x20: [io 0x18e0-0x18ff]
[ 0.156595] pci 0000:01:00.0: [1002:7145] type 00 class 0x030000
[ 0.156629] pci 0000:01:00.0: reg 0x10: [mem 0xd8000000-0xdfffffff pref]
[ 0.156649] pci 0000:01:00.0: reg 0x14: [io 0x2000-0x20ff]
[ 0.156672] pci 0000:01:00.0: reg 0x18: [mem 0xee100000-0xee10ffff]
[ 0.156740] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.156834] pci 0000:01:00.0: supports D1 D2
[ 0.164025] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.164029] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.164034] pci 0000:00:01.0: bridge window [mem 0xee100000-0xee1fffff]
[ 0.164040] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.164156] pci 0000:02:00.0: [8086:109a] type 00 class 0x020000
[ 0.164189] pci 0000:02:00.0: reg 0x10: [mem 0xee000000-0xee01ffff]
[ 0.164232] pci 0000:02:00.0: reg 0x18: [io 0x3000-0x301f]
[ 0.164419] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.172025] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.172031] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.172037] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff]
[ 0.172229] pci 0000:03:00.0: [8086:4227] type 00 class 0x028000
[ 0.172287] pci 0000:03:00.0: reg 0x10: [mem 0xedf00000-0xedf00fff]
[ 0.172709] pci 0000:03:00.0: PME# supported from D0 D3hot
[ 0.180078] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.180084] pci 0000:00:1c.1: bridge window [io 0x4000-0x5fff]
[ 0.180090] pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff]
[ 0.180100] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref]
[ 0.180189] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.180195] pci 0000:00:1c.2: bridge window [io 0x6000-0x7fff]
[ 0.180201] pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff]
[ 0.180210] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref]
[ 0.180297] pci 0000:00:1c.3: PCI bridge to [bus 0c-13]
[ 0.180304] pci 0000:00:1c.3: bridge window [io 0x8000-0x9fff]
[ 0.180310] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff]
[ 0.180319] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref]
[ 0.180412] pci 0000:15:00.0: [104c:ac56] type 02 class 0x060700
[ 0.180442] pci 0000:15:00.0: reg 0x10: [mem 0xe4300000-0xe4300fff]
[ 0.180490] pci 0000:15:00.0: supports D1 D2
[ 0.180493] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.180619] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
[ 0.180625] pci 0000:00:1e.0: bridge window [io 0xa000-0xdfff]
[ 0.180631] pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff]
[ 0.180640] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 0.180644] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.180650] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.180653] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.180656] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.180659] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.180663] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.180666] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed40fff] (subtractive decode)
[ 0.180734] pci_bus 0000:16: busn_res: can not insert [bus 16-ff] under [bus 15-18] (conflicts with (null) [bus 15-18])
[ 0.180742] pci_bus 0000:16: busn_res: [bus 16-ff] end is updated to 17
[ 0.180839] pci_bus 0000:00: on NUMA node 0
[ 0.180842] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.181572] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.181572] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.181572] Found 1 acpi root devices
[ 0.181572] ACPI : EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.181572] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.181572] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.181572] vgaarb: loaded
[ 0.181572] vgaarb: bridge control possible 0000:01:00.0
[ 0.181572] SCSI subsystem initialized
[ 0.181572] libata version 3.00 loaded.
[ 0.181572] ACPI: bus type USB registered
[ 0.181572] usbcore: registered new interface driver usbfs
[ 0.181572] usbcore: registered new interface driver hub
[ 0.181572] usbcore: registered new device driver usb
[ 0.181572] PCI: Using ACPI for IRQ routing
[ 0.186282] PCI: pci_cache_line_size set to 64 bytes
[ 0.186369] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.186372] e820: reserve RAM buffer [mem 0xbfed0000-0xbfffffff]
[ 0.186500] NetLabel: Initializing
[ 0.186502] NetLabel: domain hash size = 128
[ 0.186504] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.186523] NetLabel: unlabeled traffic allowed by default
[ 0.186540] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.186540] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.186540] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.188045] Switched to clocksource hpet
[ 0.199088] AppArmor: AppArmor Filesystem Enabled
[ 0.199138] pnp: PnP ACPI init
[ 0.199161] ACPI: bus type PNP registered
[ 0.199830] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.199835] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.199838] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.199842] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
[ 0.199846] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[ 0.199849] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.199853] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.199857] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.199861] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.199864] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.199868] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.199872] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.199876] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.199880] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.199883] system 00:00: [mem 0xfed41000-0xffffffff] could not be reserved
[ 0.199889] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.200063] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.200067] system 00:01: [io 0x1000-0x107f] could not be reserved
[ 0.200071] system 00:01: [io 0x1180-0x11bf] has been reserved
[ 0.200079] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.200082] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.200086] system 00:01: [io 0x1600-0x165f] could not be reserved
[ 0.200090] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.200094] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.200098] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.200102] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.200106] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.200110] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.200185] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.200200] pnp 00:03: [dma 4]
[ 0.200231] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.200274] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.200328] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.200373] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.200422] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.200468] pnp 00:08: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
[ 0.200870] pnp 00:09: Plug and Play ACPI device, IDs IBM0071 PNP0511 (disabled)
[ 0.200935] pnp 00:0a: Plug and Play ACPI device, IDs ATM1200 PNP0c31 (active)
[ 0.201547] pnp: PnP ACPI: found 11 devices
[ 0.201549] ACPI: bus type PNP unregistered
[ 0.201553] PnPBIOS: Disabled by ACPI PNP
[ 0.239589] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.239642] pci 0000:00:1f.0: BAR 13: [io 0x1000-0x107f] has bogus alignment
[ 0.239647] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.239656] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.239661] pci 0000:01:00.0: BAR 6: assigned [mem 0xee120000-0xee13ffff pref]
[ 0.239666] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.239670] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.239675] pci 0000:00:01.0: bridge window [mem 0xee100000-0xee1fffff]
[ 0.239680] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.239685] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.239690] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.239697] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xee0fffff]
[ 0.239703] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.239712] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.239716] pci 0000:00:1c.1: bridge window [io 0x4000-0x5fff]
[ 0.239724] pci 0000:00:1c.1: bridge window [mem 0xec000000-0xedffffff]
[ 0.239730] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe40fffff 64bit pref]
[ 0.239738] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
[ 0.239743] pci 0000:00:1c.2: bridge window [io 0x6000-0x7fff]
[ 0.239750] pci 0000:00:1c.2: bridge window [mem 0xe8000000-0xe9ffffff]
[ 0.239756] pci 0000:00:1c.2: bridge window [mem 0xe4100000-0xe41fffff 64bit pref]
[ 0.239765] pci 0000:00:1c.3: PCI bridge to [bus 0c-13]
[ 0.239769] pci 0000:00:1c.3: bridge window [io 0x8000-0x9fff]
[ 0.239777] pci 0000:00:1c.3: bridge window [mem 0xea000000-0xebffffff]
[ 0.239783] pci 0000:00:1c.3: bridge window [mem 0xe4200000-0xe42fffff 64bit pref]
[ 0.239794] pci 0000:15:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.239797] pci 0000:15:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.239801] pci 0000:15:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.239804] pci 0000:15:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.239808] pci 0000:15:00.0: BAR 15: assigned [mem 0xe0000000-0xe3ffffff pref]
[ 0.239813] pci 0000:15:00.0: BAR 16: assigned [mem 0xc4000000-0xc7ffffff]
[ 0.239816] pci 0000:15:00.0: BAR 13: assigned [io 0xa000-0xa0ff]
[ 0.239820] pci 0000:15:00.0: BAR 14: assigned [io 0xa400-0xa4ff]
[ 0.239823] pci 0000:15:00.0: CardBus bridge to [bus 16-17]
[ 0.239827] pci 0000:15:00.0: bridge window [io 0xa000-0xa0ff]
[ 0.239833] pci 0000:15:00.0: bridge window [io 0xa400-0xa4ff]
[ 0.239841] pci 0000:15:00.0: bridge window [mem 0xe0000000-0xe3ffffff pref]
[ 0.239847] pci 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
[ 0.239854] pci 0000:00:1e.0: PCI bridge to [bus 15-18]
[ 0.239859] pci 0000:00:1e.0: bridge window [io 0xa000-0xdfff]
[ 0.239866] pci 0000:00:1e.0: bridge window [mem 0xe4300000-0xe7ffffff]
[ 0.239872] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 0.239882] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.239886] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.239889] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.239892] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.239895] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.239898] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.239901] pci_bus 0000:00: resource 10 [mem 0xfed40000-0xfed40fff]
[ 0.239905] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.239908] pci_bus 0000:01: resource 1 [mem 0xee100000-0xee1fffff]
[ 0.239912] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff 64bit pref]
[ 0.239915] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.239918] pci_bus 0000:02: resource 1 [mem 0xee000000-0xee0fffff]
[ 0.239921] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.239925] pci_bus 0000:03: resource 0 [io 0x4000-0x5fff]
[ 0.239928] pci_bus 0000:03: resource 1 [mem 0xec000000-0xedffffff]
[ 0.239931] pci_bus 0000:03: resource 2 [mem 0xe4000000-0xe40fffff 64bit pref]
[ 0.239935] pci_bus 0000:04: resource 0 [io 0x6000-0x7fff]
[ 0.239938] pci_bus 0000:04: resource 1 [mem 0xe8000000-0xe9ffffff]
[ 0.239941] pci_bus 0000:04: resource 2 [mem 0xe4100000-0xe41fffff 64bit pref]
[ 0.239944] pci_bus 0000:0c: resource 0 [io 0x8000-0x9fff]
[ 0.239948] pci_bus 0000:0c: resource 1 [mem 0xea000000-0xebffffff]
[ 0.239951] pci_bus 0000:0c: resource 2 [mem 0xe4200000-0xe42fffff 64bit pref]
[ 0.239954] pci_bus 0000:15: resource 0 [io 0xa000-0xdfff]
[ 0.239958] pci_bus 0000:15: resource 1 [mem 0xe4300000-0xe7ffffff]
[ 0.239961] pci_bus 0000:15: resource 2 [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 0.239964] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7]
[ 0.239967] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff]
[ 0.239970] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.239973] pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.239976] pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.239980] pci_bus 0000:15: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.239983] pci_bus 0000:15: resource 10 [mem 0xfed40000-0xfed40fff]
[ 0.239986] pci_bus 0000:16: resource 0 [io 0xa000-0xa0ff]
[ 0.239989] pci_bus 0000:16: resource 1 [io 0xa400-0xa4ff]
[ 0.239993] pci_bus 0000:16: resource 2 [mem 0xe0000000-0xe3ffffff pref]
[ 0.239996] pci_bus 0000:16: resource 3 [mem 0xc4000000-0xc7ffffff]
[ 0.240055] NET: Registered protocol family 2
[ 0.240329] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.240355] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.240397] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.240430] TCP: reno registered
[ 0.240434] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.240446] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.240522] NET: Registered protocol family 1
[ 0.241237] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.241258] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.241322] Trying to unpack rootfs image as initramfs...
[ 0.837326] Freeing initrd memory: 23772K (f5182000 - f68b9000)
[ 0.837463] Simple Boot Flag at 0x35 set to 0x1
[ 0.837651] microcode: CPU0 sig=0x6ec, pf=0x20, revision=0x54
[ 0.837663] microcode: CPU1 sig=0x6ec, pf=0x20, revision=0x54
[ 0.837764] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Hoffe mal, ihr könnt das finden, was ihr zu finden meint. Dmesg kommt im nächsten post - bin über die Zeichengrenze gekommen (knapp über 82.000 Zeichen - erlaubt sind max. 65.000 Zeichen...)
Traditional Avatar by Darksittich
|
|
|
22.01.2015 |
DrDerrek
Ciderpony
Hat an der UN geleckt
Beiträge: 2.570
Registriert seit: 20. Jul 2014
|
RE: Von Windows auf Linux - die Umsteiger
(22.01.2015)Crash Override schrieb: xorg.0.log existiert nicht. Ich bekomme da keine ausgabe von - hatte ich aber schonmal erwähnt...
Code:
crash@crash-ThinkPad-T60:~$ /var/log/Xorg.0.log
bash: /var/log/Xorg.0.log: Keine Berechtigung
crash@crash-ThinkPad-T60:~$
Das funktioniert eh nicht, da du ja irgendein Programm brauchst, welches dir die Logdatei anzeigst. Probier mal
Code:
vi /var/log/Xorg.0.log
oder
Code:
cat /var/log/Xorg.0.log
als root.
Ob die Datei wirklich existiert kannst du auch ohne Rootrechte mit folgendem Befehl sehen:
|
|
|
22.01.2015 |
Crash Override
Faust
Beiträge: 14.545
Registriert seit: 10. Feb 2013
|
RE: Von Windows auf Linux - die Umsteiger
Hier der 2.te teil:
Code:
[ 0.837767] Scanning for low memory corruption every 60 seconds
[ 0.838092] Initialise system trusted keyring
[ 0.838156] audit: initializing netlink socket (disabled)
[ 0.838174] type=2000 audit(1421923043.836:1): initialized
[ 0.867534] bounce pool size: 64 pages
[ 0.867550] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.869619] zbud: loaded
[ 0.869718] VFS: Disk quotas dquot_6.5.2
[ 0.869790] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.870505] fuse init (API version 7.22)
[ 0.870643] msgmni has been set to 1698
[ 0.870726] Key type big_key registered
[ 0.871494] Key type asymmetric registered
[ 0.871497] Asymmetric key parser 'x509' registered
[ 0.871547] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.871600] io scheduler noop registered
[ 0.871603] io scheduler deadline registered (default)
[ 0.871645] io scheduler cfq registered
[ 0.871902] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.872088] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.872296] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.872504] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 0.872714] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[ 0.872867] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.872870] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.872875] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.872907] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.872910] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.872916] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.872947] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.872949] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.872955] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.872984] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.872990] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.873019] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.873026] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.873050] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.873135] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 17aa ss_did 2011
[ 0.873175] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.873195] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 27d2 ss_vid 17aa ss_did 2011
[ 0.873229] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[ 0.873247] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 27d4 ss_vid 17aa ss_did 2011
[ 0.873280] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
[ 0.873298] pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 27d6 ss_vid 17aa ss_did 2011
[ 0.873334] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
[ 0.873342] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.873409] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.873411] vesafb: scrolling: redraw
[ 0.873414] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.873641] vesafb: framebuffer at 0xd8000000, mapped to 0xf8480000, using 3072k, total 3072k
[ 0.921506] Console: switching to colour frame buffer device 128x48
[ 0.969267] fb0: VESA VGA frame buffer device
[ 0.969295] intel_idle: does not run on family 6 model 14
[ 0.969305] ipmi message handler version 39.2
[ 0.969495] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.969664] ACPI: AC Adapter [AC] (on-line)
[ 0.969922] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.970059] ACPI: Lid Switch [LID]
[ 0.970117] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.970122] ACPI: Sleep Button [SLPB]
[ 0.970194] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.970198] ACPI: Power Button [PWRF]
[ 0.972133] ACPI: acpi_idle registered with cpuidle
[ 0.974337] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.974341] ACPI: Thermal Zone [THM0] (49 C)
[ 0.975678] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.975681] ACPI: Thermal Zone [THM1] (55 C)
[ 0.975718] GHES: HEST is not enabled!
[ 0.975810] isapnp: Scanning for PnP cards...
[ 0.975932] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.979447] Linux agpgart interface v0.103
[ 0.980234] tpm_tis 00:0a: 1.2 TPM (device-id 0x3202, rev-id 5)
[ 0.989232] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.989240] ACPI: Battery Slot [BAT0] (battery present)
[ 1.960169] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
[ 1.962163] brd: module loaded
[ 1.963139] loop: module loaded
[ 1.963314] ata_piix 0000:00:1f.2: version 2.13
[ 1.963397] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 2.116767] scsi0 : ata_piix
[ 2.116854] scsi1 : ata_piix
[ 2.116902] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
[ 2.116905] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
[ 2.117364] libphy: Fixed MDIO Bus: probed
[ 2.117514] tun: Universal TUN/TAP device driver, 1.6
[ 2.117516] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.117596] PPP generic driver version 2.4.2
[ 2.117651] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.117657] ehci-pci: EHCI PCI platform driver
[ 2.117766] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 2.117777] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.117796] ehci-pci 0000:00:1d.7: debug port 1
[ 2.121705] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 2.122723] ehci-pci 0000:00:1d.7: irq 19, io mem 0xee404000
[ 2.123480] isapnp: No Plug & Play device found
[ 2.132035] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.132127] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.132130] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.132133] usb usb1: Product: EHCI Host Controller
[ 2.132136] usb usb1: Manufacturer: Linux 3.13.0-44-generic ehci_hcd
[ 2.132139] usb usb1: SerialNumber: 0000:00:1d.7
[ 2.132315] hub 1-0:1.0: USB hub found
[ 2.132326] hub 1-0:1.0: 8 ports detected
[ 2.132636] ehci-platform: EHCI generic platform driver
[ 2.132648] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.132650] ohci-pci: OHCI PCI platform driver
[ 2.132666] ohci-platform: OHCI generic platform driver
[ 2.132677] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.132763] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.132770] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.132813] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
[ 2.132881] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.132885] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.132888] usb usb2: Product: UHCI Host Controller
[ 2.132891] usb usb2: Manufacturer: Linux 3.13.0-44-generic uhci_hcd
[ 2.132894] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.133051] hub 2-0:1.0: USB hub found
[ 2.133061] hub 2-0:1.0: 2 ports detected
[ 2.133253] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.133260] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.133303] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
[ 2.133364] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.133368] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.133371] usb usb3: Product: UHCI Host Controller
[ 2.133374] usb usb3: Manufacturer: Linux 3.13.0-44-generic uhci_hcd
[ 2.133377] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.133562] hub 3-0:1.0: USB hub found
[ 2.133572] hub 3-0:1.0: 2 ports detected
[ 2.133767] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.133774] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.133816] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 2.133878] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.133881] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.133884] usb usb4: Product: UHCI Host Controller
[ 2.133887] usb usb4: Manufacturer: Linux 3.13.0-44-generic uhci_hcd
[ 2.133890] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.134064] hub 4-0:1.0: USB hub found
[ 2.134074] hub 4-0:1.0: 2 ports detected
[ 2.134272] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.134279] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.134308] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860
[ 2.134369] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.134373] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.134376] usb usb5: Product: UHCI Host Controller
[ 2.134379] usb usb5: Manufacturer: Linux 3.13.0-44-generic uhci_hcd
[ 2.134381] usb usb5: SerialNumber: 0000:00:1d.3
[ 2.134546] hub 5-0:1.0: USB hub found
[ 2.134556] hub 5-0:1.0: 2 ports detected
[ 2.134759] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 2.142682] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.142689] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.142916] mousedev: PS/2 mouse device common for all mice
[ 2.143271] rtc_cmos 00:06: RTC can wake from S4
[ 2.143473] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 2.143508] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.143608] device-mapper: uevent: version 1.0.3
[ 2.143733] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 2.143761] platform eisa.0: Probing EISA bus 0
[ 2.143777] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 2.143781] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 2.143784] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 2.143787] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 2.143790] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 2.143793] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 2.143796] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 2.143799] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 2.143802] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 2.143805] platform eisa.0: EISA: Detected 0 cards
[ 2.143815] cpufreq-nforce2: No nForce2 chipset.
[ 2.143819] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.144017] TCP: cubic registered
[ 2.144178] NET: Registered protocol family 10
[ 2.144461] NET: Registered protocol family 17
[ 2.144475] Key type dns_resolver registered
[ 2.144734] Using IPI No-Shortcut mode
[ 2.144961] Loading compiled-in X.509 certificates
[ 2.150176] Loaded X.509 cert 'Magrathea: Glacier signing key: 221a5ee8b665d05558a1dee8e31bf16eb8df8fd8'
[ 2.150194] registered taskstats version 1
[ 2.152195] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 2.153865] Key type trusted registered
[ 2.156508] Key type encrypted registered
[ 2.159973] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.196206] tpm_tis 00:0a: A TPM error (6) occurred attempting to read a pcr value
[ 2.196209] IMA: No TPM chip found, activating TPM-bypass!
[ 2.196622] regulator-dummy: disabling
[ 2.196670] Magic number: 15:262:629
[ 2.196807] rtc_cmos 00:06: setting system clock to 2015-01-22 10:37:25 UTC (1421923045)
[ 2.198164] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.198169] EDD information not available.
[ 2.198288] PM: Hibernation image not present or could not be loaded.
[ 2.284622] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4083N, 1.00, max UDMA/33
[ 2.284754] ata1.00: ATA-9: Samsung SSD 840 Series, DXT07B0Q, max UDMA/133
[ 2.284759] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.286613] ata1.00: configured for UDMA/133
[ 2.286833] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DXT0 PQ: 0 ANSI: 5
[ 2.287025] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.287033] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.287231] sd 0:0:0:0: [sda] Write Protect is off
[ 2.287235] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.287317] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.288422] sda: sda1 sda2 < sda5 >
[ 2.289260] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.300356] ata2.00: configured for UDMA/33
[ 2.304561] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4083N 1.00 PQ: 0 ANSI: 5
[ 2.308466] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.308470] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.308627] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.308784] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.309365] Freeing unused kernel memory: 876K (c19bb000 - c1a96000)
[ 2.309450] Write protecting the kernel text: 6548k
[ 2.309571] Write protecting the kernel read-only data: 2772k
[ 2.309573] NX-protecting the kernel data: 5740k
[ 2.326746] systemd-udevd[104]: starting version 204
[ 2.349587] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 2.352108] acpi device:06: registered as cooling_device2
[ 2.352211] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input5
[ 2.371468] pps_core: LinuxPPS API ver. 1 registered
[ 2.371473] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.377709] PTP clock support registered
[ 2.396298] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 2.396303] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 2.396545] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.396589] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X
[ 2.536441] e1000e 0000:02:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:16:41:e0:bb:78
[ 2.536447] e1000e 0000:02:00.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.536524] e1000e 0000:02:00.0 eth0: MAC: 2, PHY: 2, PBA No: 005301-003
[ 3.118466] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000/0x0, board id: 71, fw id: 67352
[ 3.118474] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 3.148095] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[ 3.158267] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 3.311378] usb 5-1: New USB device found, idVendor=0a5c, idProduct=2110
[ 3.311383] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.311386] usb 5-1: Product: BCM2045B
[ 3.311389] usb 5-1: Manufacturer: Broadcom Corp
[ 3.552094] usb 5-2: new full-speed USB device number 3 using uhci_hcd
[ 3.724392] usb 5-2: New USB device found, idVendor=0483, idProduct=2016
[ 3.724396] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.724399] usb 5-2: Product: Biometric Coprocessor
[ 3.724402] usb 5-2: Manufacturer: STMicroelectronics
[ 3.964058] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[ 4.224289] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.363878] usb 4-1: New USB device found, idVendor=1532, idProduct=000d
[ 4.363884] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.363974] usb 4-1: Product: Razer Diamondback 3G
[ 4.363977] usb 4-1: Manufacturer: Razer
[ 4.381919] random: init urandom read with 68 bits of entropy available
[ 4.616052] usb 1-2: new high-speed USB device number 5 using ehci-pci
[ 4.740926] Adding 3142652k swap on /dev/sda5. Priority:-1 extents:1 across:3142652k SSFS
[ 4.750937] usb 1-2: New USB device found, idVendor=12d1, idProduct=1446
[ 4.750947] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[ 4.750954] usb 1-2: Product: HUAWEI Mobile
[ 4.750960] usb 1-2: Manufacturer: HUAWEI Technology
[ 5.737706] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 5.917671] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.055127] systemd-udevd[351]: starting version 204
[ 6.088734] random: nonblocking pool is initialized
[ 6.149637] lp: driver loaded but no devices found
[ 6.170741] ppdev: user-space parallel port driver
[ 6.307930] NET: Registered protocol family 23
[ 6.436613] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 6.576976] Bluetooth: Core ver 2.17
[ 6.577056] NET: Registered protocol family 31
[ 6.577058] Bluetooth: HCI device and connection manager initialized
[ 6.577069] Bluetooth: HCI socket layer initialized
[ 6.577072] Bluetooth: L2CAP socket layer initialized
[ 6.577079] Bluetooth: SCO socket layer initialized
[ 6.646923] nsc-ircc 00:09: [io 0x02f8-0x02ff]
[ 6.647002] nsc-ircc 00:09: [irq 3]
[ 6.647006] nsc-ircc 00:09: [dma 1]
[ 6.647461] nsc-ircc 00:09: activated
[ 6.647764] nsc-ircc, chip->init
[ 6.647784] nsc-ircc, Found chip at base=0x164e
[ 6.647842] nsc-ircc, driver loaded (Dag Brattli)
[ 6.648173] IrDA: Registered device irda0
[ 6.648176] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[ 6.663068] cfg80211: Calling CRDA to update world regulatory domain
[ 6.666655] usbcore: registered new interface driver btusb
[ 6.740897] hidraw: raw HID events driver (C) Jiri Kosina
[ 6.744274] intel_rng: FWH not detected
[ 6.774086] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.774092] Bluetooth: BNEP filters: protocol multicast
[ 6.774105] Bluetooth: BNEP socket layer initialized
[ 6.785288] pci 0000:00:1e.0: enabling device (0005 -> 0007)
[ 6.785486] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:2012]
[ 6.785514] yenta_cardbus 0000:15:00.0: Using INTVAL to route CSC interrupts to PCI
[ 6.785517] yenta_cardbus 0000:15:00.0: Routing CardBus interrupts to PCI
[ 6.785524] yenta_cardbus 0000:15:00.0: TI: mfunc 0x01d01002, devctl 0x64
[ 6.832850] Bluetooth: RFCOMM TTY layer initialized
[ 6.832867] Bluetooth: RFCOMM socket layer initialized
[ 6.832878] Bluetooth: RFCOMM ver 1.11
[ 6.835012] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20131115/utaddress-251)
[ 6.835022] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.835028] ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251)
[ 6.835033] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.835036] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251)
[ 6.835040] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.835043] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.842319] usbcore: registered new interface driver usbhid
[ 6.842324] usbhid: USB HID core driver
[ 6.948512] leds_ss4200: no LED devices found
[ 6.959710] type=1400 audit(1421923050.255:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=500 comm="apparmor_parser"
[ 6.959722] type=1400 audit(1421923050.255:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=500 comm="apparmor_parser"
[ 6.963058] type=1400 audit(1421923050.259:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=500 comm="apparmor_parser"
[ 7.023446] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cf0, PCI irq 16
[ 7.023454] yenta_cardbus 0000:15:00.0: Socket status: 30000007
[ 7.023463] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0xa000-0xdfff]
[ 7.023467] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xdfff:
[ 7.052953] Non-volatile memory driver v1.3
[ 7.068825] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 7.068831] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 7.068833] thinkpad_acpi: ThinkPad BIOS 79ETE7WW (2.27 ), EC 79HT50WW-1.07
[ 7.068836] thinkpad_acpi: Lenovo ThinkPad T60, model 200763G
[ 7.071328] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 7.071479] thinkpad_acpi: radio switch found; radios are enabled
[ 7.071494] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 7.071496] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 7.075539] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 7.080347] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 7.080504] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 7.081883] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
[ 7.106784] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 7.106790] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 7.106851] iwl3945 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 7.164542] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 7.169954] iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 7.169960] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 7.170043] iwl3945 0000:03:00.0: irq 46 for MSI/MSI-X
[ 7.191754] scsi2 : usb-storage 1-2:1.0
[ 7.199594] usb-storage 1-2:1.1: USB Mass Storage device detected
[ 7.232497] scsi3 : usb-storage 1-2:1.1
[ 7.232708] usbcore: registered new interface driver usb-storage
[ 7.295371] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 7.301313] type=1400 audit(1421923050.599:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=539 comm="apparmor_parser"
[ 7.301326] type=1400 audit(1421923050.599:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=539 comm="apparmor_parser"
[ 7.301333] type=1400 audit(1421923050.599:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=539 comm="apparmor_parser"
[ 7.302025] type=1400 audit(1421923050.599:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=539 comm="apparmor_parser"
[ 7.302034] type=1400 audit(1421923050.599:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=539 comm="apparmor_parser"
[ 7.302392] type=1400 audit(1421923050.599:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=539 comm="apparmor_parser"
[ 7.345923] kvm: disabled by bios
[ 7.384304] kvm: disabled by bios
[ 7.028885] excluding 0xa000-0xa0ff 0xa400-0xa4ff
[ 7.389931] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe4300000-0xe7ffffff]
[ 7.389938] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4300000-0xe7ffffff:
[ 7.389941] excluding 0xe4300000-0xe46cffff
[ 7.389955] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xe3ffffff 64bit pref]
[ 7.389958] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xe3ffffff:
[ 7.390110] excluding 0xe0000000-0xe3ffffff
[ 7.401701] init: cups main process (506) killed by HUP signal
[ 7.401720] init: cups main process ended, respawning
[ 7.551972] hda_intel: probe_mask set to 0x1 for device 17aa:2010
[ 7.552060] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 7.600973] autoconfig: line_outs=1 (0x5/0x0/0x0/0x0/0x0) type:speaker
[ 7.600979] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.600981] hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.600983] mono: mono_out=0x0
[ 7.600985] dig-out=0xa/0x0
[ 7.600987] inputs:
[ 7.600989] Mic=0x8
[ 7.600991] CD=0x19
[ 7.882756] input: Razer Razer Diamondback 3G as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input9
[ 7.883499] hid-generic 0003:1532:000D.0001: input,hidraw0: USB HID v1.10 Mouse [Razer Razer Diamondback 3G] on usb-0000:00:1d.2-1/input0
[ 7.998558] init: failsafe main process (586) killed by TERM signal
[ 8.024675] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 8.055036] cfg80211: World regulatory domain updated:
[ 8.055043] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.055046] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.055049] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.055052] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8.055054] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.055057] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.062353] excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x377
[ 8.101835] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[ 8.102318] excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 8.107158] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[ 8.115446] clean.
[ 8.115496] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[ 8.122124] clean.
[ 8.122386] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 8.122394] excluding 0xc0000-0xd3fff 0xdc000-0xfffff
[ 8.122427] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 8.122440] excluding 0xa0000000-0xa0ffffff
[ 8.122460] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 8.122473] excluding 0x60000000-0x60ffffff
[ 8.122494] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 8.137535] clean.
[ 8.189185] scsi 2:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 8.193981] sr1: scsi-1 drive
[ 8.194201] sr 2:0:0:0: Attached scsi CD-ROM sr1
[ 8.194571] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 8.233180] scsi 3:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 8.233626] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 8.235668] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 8.278354] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 8.318706] usb 1-2: USB disconnect, device number 5
[ 8.324817] systemd-udevd[377]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 8.442487] init: samba-ad-dc main process (700) terminated with status 1
[ 8.463770] systemd-udevd[377]: Failed to apply ACL on /dev/sr1: No such file or directory
[ 8.515006] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
[ 8.606196] systemd-udevd[377]: inotify_add_watch(6, /dev/sdb, 10) failed: No such file or directory
[ 8.637355] type=1400 audit(1421923051.935:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=818 comm="apparmor_parser"
[ 8.937821] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X
[ 9.040153] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X
[ 9.040684] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.041242] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.043942] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 10.035913] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 10.035922] Disabling lock debugging due to kernel taint
[ 10.048879] fglrx: module verification failed: signature and/or required key missing - tainting kernel
[ 10.058616] <6>[fglrx] Maximum main memory to use for locked dma buffers: 2882 MBytes.
[ 10.059265] <3>[fglrx:firegl_init_device_list] *ERROR* No supported display adapters were found
[ 10.059269] <3>[fglrx:firegl_init_module] *ERROR* firegl_init_devices failed
[ 10.437666] init: plymouth-upstart-bridge main process ended, respawning
[ 10.447927] init: plymouth-upstart-bridge main process (1239) terminated with status 1
[ 10.447947] init: plymouth-upstart-bridge main process ended, respawning
[ 12.400069] usb 1-2: new high-speed USB device number 6 using ehci-pci
[ 12.534664] usb 1-2: New USB device found, idVendor=12d1, idProduct=1436
[ 12.534671] usb 1-2: New USB device strings: Mfr=4, Product=3, SerialNumber=0
[ 12.534674] usb 1-2: Product: HUAWEI Mobile
[ 12.534677] usb 1-2: Manufacturer: HUAWEI Technology
[ 12.537464] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 12.537695] usb-storage 1-2:1.1: USB Mass Storage device detected
[ 12.537862] usb-storage 1-2:1.2: USB Mass Storage device detected
[ 12.538030] usb-storage 1-2:1.3: USB Mass Storage device detected
[ 12.538188] usb-storage 1-2:1.4: USB Mass Storage device detected
[ 12.538346] usb-storage 1-2:1.5: USB Mass Storage device detected
[ 12.538834] scsi9 : usb-storage 1-2:1.5
[ 12.538985] usb-storage 1-2:1.6: USB Mass Storage device detected
[ 12.539349] scsi10 : usb-storage 1-2:1.6
[ 12.572649] usbcore: registered new interface driver usbserial
[ 12.572671] usbcore: registered new interface driver usbserial_generic
[ 12.572685] usbserial: USB Serial support registered for generic
[ 12.624051] usbcore: registered new interface driver option
[ 12.624360] usbserial: USB Serial support registered for GSM modem (1-port)
[ 12.628775] cdc_ether 1-2:1.1 wwan0: register 'cdc_ether' at usb-0000:00:1d.7-2, Mobile Broadband Network Device, 02:50:f3:00:00:00
[ 12.629024] usbcore: registered new interface driver cdc_ether
[ 12.629549] option 1-2:1.0: GSM modem (1-port) converter detected
[ 12.629765] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0
[ 12.629825] option 1-2:1.3: GSM modem (1-port) converter detected
[ 12.630104] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB1
[ 12.630124] option 1-2:1.4: GSM modem (1-port) converter detected
[ 12.630266] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB2
[ 13.538294] scsi 9:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 13.539510] scsi 10:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 13.542534] sr1: scsi-1 drive
[ 13.543111] sr 9:0:0:0: Attached scsi CD-ROM sr1
[ 13.543351] sr 9:0:0:0: Attached scsi generic sg2 type 5
[ 13.543743] sd 10:0:0:0: Attached scsi generic sg3 type 0
[ 13.546022] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[ 37.113948] audit_printk_skb: 96 callbacks suppressed
[ 37.113955] type=1400 audit(1421923080.411:44): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1583 comm="apparmor_parser"
[ 37.113965] type=1400 audit(1421923080.411:45): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1583 comm="apparmor_parser"
[ 37.114663] type=1400 audit(1421923080.411:46): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1583 comm="apparmor_parser"
[ 63.104114] PPP BSD Compression module registered
[ 63.144087] PPP Deflate Compression module registered
[ 1229.993783] perf samples too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
crash@crash-ThinkPad-T60:~$
Code:
crash@crash-ThinkPad-T60:~$ ls /var/log
alternatives.log apport.log.4.gz chkrootkit dpkg.log.4.gz jockey.log.2.gz pm-powersave.log.3.gz syslog.6.gz
alternatives.log.1 apport.log.5.gz ConsoleKit dpkg.log.5.gz kern.log pm-powersave.log.4.gz syslog.7.gz
alternatives.log.2.gz apport.log.6.gz cups dpkg.log.6.gz kern.log.1 pm-suspend.log teamviewer
alternatives.log.3.gz apport.log.7.gz dist-upgrade dpkg.log.7.gz kern.log.2.gz pm-suspend.log.1 udev
alternatives.log.4.gz apt dmesg dpkg.log.8.gz kern.log.3.gz pm-suspend.log.2.gz ufw.log
alternatives.log.5.gz auth.log dmesg.0 dpkg.log.9.gz kern.log.4.gz pm-suspend.log.3.gz unattended-upgrades
alternatives.log.6.gz auth.log.1 dmesg.1.gz faillog lastlog rkhunter.log upstart
alternatives.log.7.gz auth.log.2.gz dmesg.2.gz fontconfig.log lightdm samba wtmp
alternatives.log.8.gz auth.log.3.gz dmesg.3.gz fsck mail.err syslog wtmp.1
alternatives.log.9.gz auth.log.4.gz dmesg.4.gz gpu-manager.log mail.log syslog.1 Xorg.0.log
apport.log boot.log dpkg.log hp news syslog.2.gz Xorg.0.log.old
apport.log.1 bootstrap.log dpkg.log.1 installer pm-powersave.log syslog.3.gz
apport.log.2.gz btmp dpkg.log.2.gz jockey.log pm-powersave.log.1 syslog.4.gz
apport.log.3.gz btmp.1 dpkg.log.3.gz jockey.log.1 pm-powersave.log.2.gz syslog.5.gz
crash@crash-ThinkPad-T60:~$
Traditional Avatar by Darksittich
|
|
|
22.01.2015 |
404compliant
GalaCon Volunteer-Stratege
Carrot Not Found
Beiträge: 8.345
Registriert seit: 23. Okt 2011
|
RE: Von Windows auf Linux - die Umsteiger
Ok, der Kernel-Teil der Grafiktreiber scheint schon mal korrekt zu initialisieren, damit müsste auch die Firmware vorhanden sein.
Die Xorg.0.log ist auch da, ist ja in der ls-Ausgabe aufgeführt. Nur wie schon geschrieben, das ist kein Programm, sondern eine Textdatei. Ich würde es mal mit sudo less /var/log/Xorg.0.log versuchen. Mit etwas Glück kannst du less auch durch gedit ersetzen, macht das Kopieren einfacher.
|
|
|
22.01.2015 |
Crash Override
Faust
Beiträge: 14.545
Registriert seit: 10. Feb 2013
|
RE: Von Windows auf Linux - die Umsteiger
Na dann...
Code:
[ 9.887]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 9.887] X Protocol Version 11, Revision 0
[ 9.887] Build Operating System: Linux 3.2.0-70-generic i686 Ubuntu
[ 9.887] Current Operating System: Linux crash-ThinkPad-T60 3.13.0-44-generic #73-Ubuntu SMP Tue Dec 16 00:23:46 UTC 2014 i686
[ 9.887] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-44-generic root=UUID=4f486a92-492a-4e7d-bfbc-768ed730c69e ro quiet splash vt.
handoff=7
[ 9.887] Build Date: 10 December 2014 06:16:10PM
[ 9.887] xorg-server 2:1.15.1-0ubuntu2.6 (For technical support please see http://www.ubuntu.com/support)
[ 9.887] Current version of pixman: 0.30.2
[ 9.888] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 9.888] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 9.888] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 22 11:37:33 2015
[ 9.888] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 9.889] (==) No Layout section. Using the first Screen section.
[ 9.889] (==) No screen section available. Using defaults.
[ 9.889] (**) |-->Screen "Default Screen Section" (0)
[ 9.889] (**) | |-->Monitor "<default monitor>"
[ 9.889] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 9.889] (==) Automatically adding devices
[ 9.889] (==) Automatically enabling devices
[ 9.889] (==) Automatically adding GPU devices
[ 9.889] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 9.889] Entry deleted from font path.
[ 9.889] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 9.889] Entry deleted from font path.
[ 9.889] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 9.889] Entry deleted from font path.
[ 9.889] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 9.889] Entry deleted from font path.
[ 9.889] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 9.889] Entry deleted from font path.
[ 9.889] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 9.889] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 9.889] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 9.889] (II) Loader magic: 0xb773a6c0
[ 9.889] (II) Module ABI versions:
[ 9.889] X.Org ANSI C Emulation: 0.4
[ 9.889] X.Org Video Driver: 15.0
[ 9.889] X.Org XInput driver : 20.0
[ 9.889] X.Org Server Extension : 8.0
[ 9.891] (--) PCI:*(0:1:0:0) 1002:7145:17aa:2006 rev 0, Mem @ 0xd8000000/134217728, 0xee100000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[ 9.891] Initializing built-in extension Generic Event Extension
[ 9.891] Initializing built-in extension SHAPE
[ 9.891] Initializing built-in extension MIT-SHM
[ 9.891] Initializing built-in extension XInputExtension
[ 9.891] Initializing built-in extension XTEST
[ 9.891] Initializing built-in extension BIG-REQUESTS
[ 9.891] Initializing built-in extension SYNC
[ 9.891] Initializing built-in extension XKEYBOARD
[ 9.892] Initializing built-in extension XC-MISC
[ 9.892] Initializing built-in extension SECURITY
[ 9.892] Initializing built-in extension XINERAMA
[ 9.892] Initializing built-in extension XFIXES
[ 9.892] Initializing built-in extension RENDER
[ 9.892] Initializing built-in extension RANDR
[ 9.892] Initializing built-in extension COMPOSITE
[ 9.892] Initializing built-in extension DAMAGE
[ 9.892] Initializing built-in extension MIT-SCREEN-SAVER
[ 9.892] Initializing built-in extension DOUBLE-BUFFER
[ 9.892] Initializing built-in extension RECORD
[ 9.892] Initializing built-in extension DPMS
[ 9.892] Initializing built-in extension Present
[ 9.892] Initializing built-in extension DRI3
[ 9.892] Initializing built-in extension X-Resource
[ 9.892] Initializing built-in extension XVideo
[ 9.892] Initializing built-in extension XVideo-MotionCompensation
[ 9.892] Initializing built-in extension SELinux
[ 9.892] Initializing built-in extension XFree86-VidModeExtension
[ 9.892] Initializing built-in extension XFree86-DGA
[ 9.892] Initializing built-in extension XFree86-DRI
[ 9.892] Initializing built-in extension DRI2
[ 9.892] (II) LoadModule: "glx"
[ 9.892] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/modules/extensions/libglx.so
[ 9.892] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 9.892] compiled for 6.9.0, module version = 1.0.0
[ 9.893] Loading extension GLX
[ 9.893] (==) Matched fglrx as autoconfigured driver 0
[ 9.893] (==) Matched ati as autoconfigured driver 1
[ 9.893] (==) Matched modesetting as autoconfigured driver 2
[ 9.893] (==) Matched fbdev as autoconfigured driver 3
[ 9.893] (==) Matched vesa as autoconfigured driver 4
[ 9.893] (==) Assigned the driver to the xf86ConfigLayout
[ 9.893] (II) LoadModule: "fglrx"
[ 9.893] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/modules/drivers/fglrx_drv.so
[ 9.971] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 9.971] compiled for 1.4.99.906, module version = 13.35.5
[ 9.971] Module class: X.Org Video Driver
[ 9.975] (II) Loading sub module "fglrxdrm"
[ 9.975] (II) LoadModule: "fglrxdrm"
[ 9.975] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/modules/linux/libfglrxdrm.so
[ 9.978] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 9.978] compiled for 1.4.99.906, module version = 13.35.5
[ 9.978] (II) LoadModule: "ati"
[ 9.978] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 9.978] (II) Module ati: vendor="X.Org Foundation"
[ 9.978] compiled for 1.15.1, module version = 7.5.99
[ 9.978] Module class: X.Org Video Driver
[ 9.978] ABI class: X.Org Video Driver, version 15.0
[ 9.979] (II) LoadModule: "radeon"
[ 9.979] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 9.996] (II) Module radeon: vendor="X.Org Foundation"
[ 9.996] compiled for 1.15.1, module version = 7.5.99
[ 9.996] Module class: X.Org Video Driver
[ 9.996] ABI class: X.Org Video Driver, version 15.0
[ 9.996] (II) LoadModule: "modesetting"
[ 9.996] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 9.997] (II) Module modesetting: vendor="X.Org Foundation"
[ 9.997] compiled for 1.15.0, module version = 0.8.1
[ 9.997] Module class: X.Org Video Driver
[ 9.997] ABI class: X.Org Video Driver, version 15.0
[ 9.997] (II) LoadModule: "fbdev"
[ 9.997] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 9.997] (II) Module fbdev: vendor="X.Org Foundation"
[ 9.997] compiled for 1.15.0, module version = 0.4.4
[ 9.997] Module class: X.Org Video Driver
[ 9.997] ABI class: X.Org Video Driver, version 15.0
[ 9.892] compiled for 6.9.0, module version = 1.0.0
[ 9.893] Loading extension GLX
[ 9.893] (==) Matched fglrx as autoconfigured driver 0
[ 9.893] (==) Matched ati as autoconfigured driver 1
[ 9.893] (==) Matched modesetting as autoconfigured driver 2
[ 9.893] (==) Matched fbdev as autoconfigured driver 3
[ 9.893] (==) Matched vesa as autoconfigured driver 4
[ 9.893] (==) Assigned the driver to the xf86ConfigLayout
[ 9.893] (II) LoadModule: "fglrx"
[ 9.893] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/modules/drivers/fglrx_drv.so
[ 9.971] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 9.971] compiled for 1.4.99.906, module version = 13.35.5
[ 9.971] Module class: X.Org Video Driver
[ 9.975] (II) Loading sub module "fglrxdrm"
[ 9.975] (II) LoadModule: "fglrxdrm"
[ 9.975] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/modules/linux/libfglrxdrm.so
[ 9.978] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 9.978] compiled for 1.4.99.906, module version = 13.35.5
[ 9.978] (II) LoadModule: "ati"
[ 9.978] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 9.978] (II) Module ati: vendor="X.Org Foundation"
[ 9.978] compiled for 1.15.1, module version = 7.5.99
[ 9.978] Module class: X.Org Video Driver
[ 9.978] ABI class: X.Org Video Driver, version 15.0
[ 9.979] (II) LoadModule: "radeon"
[ 9.979] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 9.996] (II) Module radeon: vendor="X.Org Foundation"
[ 9.996] compiled for 1.15.1, module version = 7.5.99
[ 9.996] Module class: X.Org Video Driver
[ 9.996] ABI class: X.Org Video Driver, version 15.0
[ 9.996] (II) LoadModule: "modesetting"
[ 9.996] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 9.997] (II) Module modesetting: vendor="X.Org Foundation"
[ 9.997] compiled for 1.15.0, module version = 0.8.1
[ 9.997] Module class: X.Org Video Driver
[ 9.997] ABI class: X.Org Video Driver, version 15.0
[ 9.997] (II) LoadModule: "fbdev"
[ 9.997] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 9.997] (II) Module fbdev: vendor="X.Org Foundation"
[ 9.997] compiled for 1.15.0, module version = 0.4.4
[ 9.997] Module class: X.Org Video Driver
[ 9.997] ABI class: X.Org Video Driver, version 15.0
[ 9.997] (II) LoadModule: "vesa"
[ 9.997] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 9.998] (II) Module vesa: vendor="X.Org Foundation"
[ 9.998] compiled for 1.15.0, module version = 2.3.3
[ 9.998] Module class: X.Org Video Driver
[ 9.998] ABI class: X.Org Video Driver, version 15.0
[ 9.998] (II) AMD Proprietary Linux Driver Version Identifier:13.35.5
[ 9.998] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-13.35.1005
[ 9.998] (II) AMD Proprietary Linux Driver Build Date: Mar 12 2014 10:32:19
[ 9.998] (II) RADEON: Driver for ATI Radeon chipsets:
Dann kommt erstmal ne Liste mit allen möglichen Radeon-Chipsets und Gpu's, u.a. diese:
Code:
ATI Mobility Radeon X1400, ATI Mobility Radeon X1300,
ATI Mobility FireGL V5200, ATI Mobility FireGL V5250,
Welches der in den T60 / T60P verbauter Grafik entspricht. (andere hab ich jetzt mal großzügig weggelassen).
Code:
[ 10.009] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 10.009] (II) FBDEV: driver for framebuffer: fbdev
[ 10.010] (II) VESA: driver for VESA chipsets: vesa
[ 10.010] (++) using VT number 7
[ 10.010] (WW) Falling back to old probe method for fglrx
[ 10.026] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 10.076] ukiDynamicMajor: failed to open /proc/ati/major
[ 10.077] (EE) No supported AMD display adapters were found
[ 10.078] (II) [KMS] drm report modesetting isn't supported.
[ 10.078] (EE) open /dev/dri/card0: No such file or directory
[ 10.078] (WW) Falling back to old probe method for modesetting
[ 10.078] (EE) open /dev/dri/card0: No such file or directory
[ 10.078] (II) Loading sub module "fbdevhw"
[ 10.078] (II) LoadModule: "fbdevhw"
[ 10.078] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 10.079] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 10.079] compiled for 1.15.1, module version = 0.0.2
[ 10.079] ABI class: X.Org Video Driver, version 15.0
[ 10.079] (**) FBDEV(2): claimed PCI slot 1@0:0:0
[ 10.079] (II) FBDEV(2): using default device
[ 10.079] (WW) Falling back to old probe method for vesa
[ 10.079] (EE) Screen 0 deleted because of no matching config section.
[ 10.079] (II) UnloadModule: "radeon"
[ 10.079] (EE) Screen 0 deleted because of no matching config section.
[ 10.079] (II) UnloadModule: "modesetting"
[ 10.079] (II) FBDEV(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 10.079] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[ 10.079] (==) FBDEV(0): RGB weight 888
[ 10.079] (==) FBDEV(0): Default visual is TrueColor
[ 10.079] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 10.079] (II) FBDEV(0): hardware: VESA VGA (video memory: 3072kB)
[ 10.079] (II) FBDEV(0): checking modes against framebuffer device...
[ 10.079] (II) FBDEV(0): checking modes against monitor...
[ 10.079] (--) FBDEV(0): Virtual size is 1024x768 (pitch 1024)
[ 10.079] (**) FBDEV(0): Built-in mode "current": 78.7 MHz, 59.9 kHz, 75.7 Hz
[ 10.079] (II) FBDEV(0): Modeline "current"x0.0 78.65 1024 1056 1184 1312 768 772 776 792 -hsync -vsync -csync (59.9 kHz b)
[ 10.079] (==) FBDEV(0): DPI set to (96, 96)
[ 10.079] (II) Loading sub module "fb"
[ 10.079] (II) LoadModule: "fb"
[ 10.081] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 10.082] (II) Module fb: vendor="X.Org Foundation"
[ 10.082] compiled for 1.15.1, module version = 1.0.0
[ 10.082] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.082] (**) FBDEV(0): using shadow framebuffer
[ 10.082] (II) Loading sub module "shadow"
[ 10.082] (II) LoadModule: "shadow"
[ 10.082] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 10.082] (II) Module shadow: vendor="X.Org Foundation"
[ 10.082] compiled for 1.15.1, module version = 1.1.0
[ 10.082] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.082] (II) UnloadModule: "fglrx"
[ 10.082] (II) Unloading fglrx
[ 10.082] (II) UnloadSubModule: "fglrxdrm"
[ 10.082] (II) Unloading fglrxdrm
[ 10.082] (II) UnloadModule: "vesa"
[ 10.082] (II) Unloading vesa
[ 10.082] (==) Depth 24 pixmap format is 32 bpp
[ 10.082] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 10.082] (==) FBDEV(0): Backing store enabled
[ 10.083] (==) FBDEV(0): DPMS enabled
[ 10.083] (==) RandR enabled
[ 10.093] (II) SELinux: Disabled on system
[ 10.095] (EE) GLX error: Can not get required symbols.
[ 10.109] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 10.114] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 10.114] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 10.114] (II) LoadModule: "evdev"
[ 10.114] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 10.115] (II) Module evdev: vendor="X.Org Foundation"
[ 10.116] compiled for 1.15.0, module version = 2.8.2
[ 10.116] Module class: X.Org XInput Driver
[ 10.116] ABI class: X.Org XInput driver, version 20.0
[ 10.116] (II) Using input driver 'evdev' for 'Power Button'
[ 10.116] (**) Power Button: always reports core events
[ 10.116] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 10.116] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 10.116] (--) evdev: Power Button: Found keys
[ 10.116] (II) evdev: Power Button: Configuring as keyboard
[ 10.116] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 10.116] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 10.116] (**) Option "xkb_rules" "evdev"
[ 10.116] (**) Option "xkb_model" "pc105"
[ 10.116] (**) Option "xkb_layout" "de"
[ 10.119] (II) XKB: reuse xkmfile /var/lib/xkb/server-808BBA3D4C227BDB44C370226C34E44C5D69A4A9.xkm
[ 10.120] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 10.120] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 10.120] (II) Using input driver 'evdev' for 'Video Bus'
[ 10.120] (**) Video Bus: always reports core events
[ 10.121] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 10.121] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 10.121] (--) evdev: Video Bus: Found keys
[ 10.121] (II) evdev: Video Bus: Configuring as keyboard
[ 10.121] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input5/event4"
[ 10.121] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 10.121] (**) Option "xkb_rules" "evdev"
[ 10.121] (**) Option "xkb_model" "pc105"
[ 10.121] (**) Option "xkb_layout" "de"
[ 10.121] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 10.121] (II) No input driver specified, ignoring this device.
[ 10.121] (II) This device may have been added with another device file.
[ 10.122] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 10.122] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 10.122] (II) Using input driver 'evdev' for 'Sleep Button'
[ 10.122] (**) Sleep Button: always reports core events
[ 10.122] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 10.122] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 10.122] (--) evdev: Sleep Button: Found keys
[ 10.122] (II) evdev: Sleep Button: Configuring as keyboard
[ 10.122] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 10.122] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 10.122] (**) Option "xkb_rules" "evdev"
[ 10.122] (**) Option "xkb_model" "pc105"
[ 10.122] (**) Option "xkb_layout" "de"
[ 10.123] (II) config/udev: Adding input device Razer Razer Diamondback 3G (/dev/input/event7)
[ 10.123] (**) Razer Razer Diamondback 3G: Applying InputClass "evdev pointer catchall"
[ 10.123] (II) Using input driver 'evdev' for 'Razer Razer Diamondback 3G'
[ 10.123] (**) Razer Razer Diamondback 3G: always reports core events
[ 10.123] (**) evdev: Razer Razer Diamondback 3G: Device: "/dev/input/event7"
[ 10.123] (--) evdev: Razer Razer Diamondback 3G: Vendor 0x1532 Product 0xd
[ 10.123] (--) evdev: Razer Razer Diamondback 3G: Found 11 mouse buttons
[ 10.123] (--) evdev: Razer Razer Diamondback 3G: Found scroll wheel(s)
[ 10.123] (--) evdev: Razer Razer Diamondback 3G: Found relative axes
[ 10.123] (--) evdev: Razer Razer Diamondback 3G: Found x and y relative axes
[ 10.123] (II) evdev: Razer Razer Diamondback 3G: Configuring as mouse
[ 10.123] (II) evdev: Razer Razer Diamondback 3G: Adding scrollwheel support
[ 10.119] (II) XKB: reuse xkmfile /var/lib/xkb/server-808BBA3D4C227BDB44C370226C34E44C5D69A4A9.xkm
[ 10.120] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 10.120] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 10.120] (II) Using input driver 'evdev' for 'Video Bus'
[ 10.120] (**) Video Bus: always reports core events
[ 10.121] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 10.121] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 10.121] (--) evdev: Video Bus: Found keys
[ 10.121] (II) evdev: Video Bus: Configuring as keyboard
[ 10.121] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input5/event4"
[ 10.121] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 10.121] (**) Option "xkb_rules" "evdev"
[ 10.121] (**) Option "xkb_model" "pc105"
[ 10.121] (**) Option "xkb_layout" "de"
[ 10.121] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 10.121] (II) No input driver specified, ignoring this device.
[ 10.121] (II) This device may have been added with another device file.
[ 10.122] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 10.122] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 10.122] (II) Using input driver 'evdev' for 'Sleep Button'
[ 10.122] (**) Sleep Button: always reports core events
[ 10.122] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 10.122] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 10.122] (--) evdev: Sleep Button: Found keys
[ 10.122] (II) evdev: Sleep Button: Configuring as keyboard
[ 10.122] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 10.122] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 10.122] (**) Option "xkb_rules" "evdev"
[ 10.122] (**) Option "xkb_model" "pc105"
[ 10.122] (**) Option "xkb_layout" "de"
[ 10.123] (II) config/udev: Adding input device Razer Razer Diamondback 3G (/dev/input/event7)
[ 10.123] (**) Razer Razer Diamondback 3G: Applying InputClass "evdev pointer catchall"
[ 10.123] (II) Using input driver 'evdev' for 'Razer Razer Diamondback 3G'
[ 10.123] (**) Razer Razer Diamondback 3G: always reports core events
[ 10.123] (**) evdev: Razer Razer Diamondback 3G: Device: "/dev/input/event7"
[ 10.123] (--) evdev: Razer Razer Diamondback 3G: Vendor 0x1532 Product 0xd
[ 10.123] (--) evdev: Razer Razer Diamondback 3G: Found 11 mouse buttons
[ 10.123] (--) evdev: Razer Razer Diamondback 3G: Found scroll wheel(s)
[ 10.123] (--) evdev: Razer Razer Diamondback 3G: Found relative axes
[ 10.123] (--) evdev: Razer Razer Diamondback 3G: Found x and y relative axes
[ 10.123] (II) evdev: Razer Razer Diamondback 3G: Configuring as mouse
[ 10.123] (II) evdev: Razer Razer Diamondback 3G: Adding scrollwheel support
[ 10.123] (**) evdev: Razer Razer Diamondback 3G: YAxisMapping: buttons 4 and 5
[ 10.123] (**) evdev: Razer Razer Diamondback 3G: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10.123] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input9/event7"
[ 10.123] (II) XINPUT: Adding extended input device "Razer Razer Diamondback 3G" (type: MOUSE, id 9)
[ 10.123] (II) evdev: Razer Razer Diamondback 3G: initialized for relative axes.
[ 10.123] (**) Razer Razer Diamondback 3G: (accel) keeping acceleration scheme 1
[ 10.123] (**) Razer Razer Diamondback 3G: (accel) acceleration profile 0
[ 10.123] (**) Razer Razer Diamondback 3G: (accel) acceleration factor: 2.000
[ 10.123] (**) Razer Razer Diamondback 3G: (accel) acceleration threshold: 4
[ 10.124] (II) config/udev: Adding input device Razer Razer Diamondback 3G (/dev/input/mouse1)
[ 10.124] (II) No input driver specified, ignoring this device.
[ 10.124] (II) This device may have been added with another device file.
[ 10.124] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 10.124] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 10.124] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 10.124] (**) AT Translated Set 2 keyboard: always reports core events
[ 10.124] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 10.124] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 10.124] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 10.124] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 10.124] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 10.124] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 10.124] (**) Option "xkb_rules" "evdev"
[ 10.124] (**) Option "xkb_model" "pc105"
[ 10.124] (**) Option "xkb_layout" "de"
[ 10.125] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
[ 10.125] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 10.125] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 10.125] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 10.125] (II) LoadModule: "synaptics"
[ 10.125] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 10.126] (II) Module synaptics: vendor="X.Org Foundation"
[ 10.126] compiled for 1.15.0, module version = 1.7.4
[ 10.126] Module class: X.Org XInput Driver
[ 10.126] ABI class: X.Org XInput driver, version 20.0
[ 10.126] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 10.126] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 10.126] (**) Option "Device" "/dev/input/event5"
[ 10.273] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 93)
[ 10.273] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 125)
[ 10.273] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 10.273] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 10.273] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 10.273] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 10.273] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 10.273] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 10.356] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event5"
[ 10.356] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 10.356] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 10.356] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 10.356] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 10.356] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 10.356] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 10.356] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 10.356] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 10.356] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 10.356] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 10.356] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 10.357] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event8)
[ 10.357] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 10.357] (**) TPPS/2 IBM TrackPoint: Applying InputClass "trackpoint catchall"
[ 10.357] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 10.357] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 10.357] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
[ 10.357] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 10.357] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 10.357] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 10.357] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 10.357] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 10.357] (**) Option "Emulate3Buttons" "true"
[ 10.357] (**) Option "EmulateWheel" "true"
[ 10.357] (**) Option "EmulateWheelButton" "2"
[ 10.357] (**) Option "YAxisMapping" "4 5"
[ 10.357] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 10.357] (**) Option "XAxisMapping" "6 7"
[ 10.357] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
[ 10.357] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 10.357] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input7/event8"
[ 10.357] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 12)
[ 10.357] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 10.357] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 10.358] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 10.358] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 10.358] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 10.358] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse2)
[ 10.358] (II) No input driver specified, ignoring this device.
[ 10.358] (II) This device may have been added with another device file.
[ 10.360] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event6)
[ 10.360] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 10.360] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 10.361] (**) ThinkPad Extra Buttons: always reports core events
[ 10.361] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event6"
[ 10.361] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 10.361] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 10.361] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 10.361] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input8/event6"
[ 10.361] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
[ 10.361] (**) Option "xkb_rules" "evdev"
[ 10.361] (**) Option "xkb_model" "pc105"
[ 10.361] (**) Option "xkb_layout" "de"
[ 10.366] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 43.096] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 43.183] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3112.602] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3112.602] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3112.605] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3412.602] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3611.835] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 12942.289] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 12942.289] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 12942.292] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 13242.288] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 13542.289] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 18980.772] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 23639.927] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 23639.927] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 23639.929] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 23655.342] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 29396.436] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 29396.436] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 29396.439] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 29696.436] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 29996.435] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 30929.920] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 31592.842] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 31592.842] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 31592.844] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 31781.528] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 32944.323] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 32944.323] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 32944.325] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 33244.323] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 33544.320] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 35440.865] (EE) FBDEV(0): FBIOBLANK: Invalid argument
Traditional Avatar by Darksittich
|
|
|
23.01.2015 |
404compliant
GalaCon Volunteer-Stratege
Carrot Not Found
Beiträge: 8.345
Registriert seit: 23. Okt 2011
|
RE: Von Windows auf Linux - die Umsteiger
Hmmmm, sieht so aus, als würde kernel modesetting (KMS) nicht funktionieren, d.H. der Kernel kontrolliert nicht den Grafikmodus der Karte. Vor einigen Jahren ist die Zuständigkeit für den Wechsel des Grafikmodus vom X-Server zum Kernel umgezogen, seit dem bittet der Radeon-Treiber den Kernel um Hilfe beim Moduswechsel.
Der fglrx-Treiber unterstützt das bis heute nicht, weshalb er irgendwie dafür sorgt, dass KMS deaktiviert wird. Ich kann nur vermuten, dass irgend welche Reste des fglrx-Treibers immer noch verhindern, dass KMS aktiv ist, und dadurch auch den radeon-Treiber sabotieren.
Google findet spontan das:
https://wiki.ubuntu.com/X/Troubleshootin...rge_-fglrx
Das wäre mal einen Versuch wert.
|
|
|
23.01.2015 |
Crash Override
Faust
Beiträge: 14.545
Registriert seit: 10. Feb 2013
|
RE: Von Windows auf Linux - die Umsteiger
Code:
crash@crash-ThinkPad-T60:~$ dpkg --get-selections|grep libgl1-mesa
libgl1-mesa-dri:i386 install
libgl1-mesa-glx:i386 install
libgl1-mesa-glx-dbg:i386 install
crash@crash-ThinkPad-T60:~$
Zumindest zeigt das die Überprüfung über dpkg. ich hoffe mal, dass dann alles richtig läuft - denn fglrx wollte er nicht de-installieren, da nix da war.
Code:
crash@crash-ThinkPad-T60:~$ sudo apt-get remove --purge xorg-driver-fglrx fglrx
[sudo] password for crash:
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
E: Paket xorg-driver-fglrx kann nicht gefunden werden.
crash@crash-ThinkPad-T60:~$
Nach erfolgtem Restart (Merke: niemals neu starten, sondern immer herunterfahren und dann manuell starten, das fabriziert sonst nur unnötige verwirrung) sagt
Code:
[ 12.156]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 12.156] X Protocol Version 11, Revision 0
[ 12.156] Build Operating System: Linux 3.2.0-70-generic i686 Ubuntu
[ 12.156] Current Operating System: Linux crash-ThinkPad-T60 3.13.0-44-generic #73-Ubuntu SMP Tue Dec 16 00:23:46 UTC 2014 i686
[ 12.156] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-44-generic root=UUID=4f486a92-492a-4e7d-bfbc-768ed730c69e ro quiet splash vt.
handoff=7
[ 12.156] Build Date: 10 December 2014 06:16:10PM
[ 12.156] xorg-server 2:1.15.1-0ubuntu2.6 (For technical support please see http://www.ubuntu.com/support)
[ 12.156] Current version of pixman: 0.30.2
[ 12.156] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 12.156] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12.157] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 23 20:27:01 2015
[ 12.158] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 12.159] (==) No Layout section. Using the first Screen section.
[ 12.159] (==) No screen section available. Using defaults.
[ 12.159] (**) |-->Screen "Default Screen Section" (0)
[ 12.159] (**) | |-->Monitor "<default monitor>"
[ 12.159] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 12.159] (==) Automatically adding devices
[ 12.159] (==) Automatically enabling devices
[ 12.159] (==) Automatically adding GPU devices
[ 12.162] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 12.162] Entry deleted from font path.
[ 12.162] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 12.162] Entry deleted from font path.
[ 12.162] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 12.162] Entry deleted from font path.
[ 12.162] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 12.162] Entry deleted from font path.
[ 12.162] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 12.162] Entry deleted from font path.
[ 12.162] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 12.162] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 12.162] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 12.162] (II) Loader magic: 0xb770d6c0
[ 12.162] (II) Module ABI versions:
[ 12.162] X.Org ANSI C Emulation: 0.4
[ 12.162] X.Org Video Driver: 15.0
[ 12.162] X.Org XInput driver : 20.0
[ 12.163] X.Org Server Extension : 8.0
[ 12.167] (--) PCI:*(0:1:0:0) 1002:7145:17aa:2006 rev 0, Mem @ 0xd8000000/134217728, 0xee100000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[ 12.174] Initializing built-in extension Generic Event Extension
[ 12.174] Initializing built-in extension SHAPE
[ 12.174] Initializing built-in extension MIT-SHM
[ 12.174] Initializing built-in extension XInputExtension
[ 12.174] Initializing built-in extension XTEST
[ 12.174] Initializing built-in extension BIG-REQUESTS
[ 12.174] Initializing built-in extension SYNC
[ 12.174] Initializing built-in extension XKEYBOARD
[ 12.174] Initializing built-in extension XC-MISC
[ 12.174] Initializing built-in extension SECURITY
[ 12.174] Initializing built-in extension XINERAMA
[ 12.174] Initializing built-in extension XFIXES
[ 12.175] Initializing built-in extension RENDER
[ 12.175] Initializing built-in extension RANDR
[ 12.175] Initializing built-in extension COMPOSITE
[ 12.175] Initializing built-in extension DAMAGE
[ 12.175] Initializing built-in extension MIT-SCREEN-SAVER
[ 12.175] Initializing built-in extension DOUBLE-BUFFER
[ 12.175] Initializing built-in extension RECORD
[ 12.175] Initializing built-in extension DPMS
[ 12.175] Initializing built-in extension Present
[ 12.175] Initializing built-in extension DRI3
[ 12.175] Initializing built-in extension X-Resource
[ 12.175] Initializing built-in extension XVideo
[ 12.175] Initializing built-in extension XVideo-MotionCompensation
[ 12.175] Initializing built-in extension SELinux
[ 12.175] Initializing built-in extension XFree86-VidModeExtension
[ 12.175] Initializing built-in extension XFree86-DGA
[ 12.175] Initializing built-in extension XFree86-DRI
[ 12.175] Initializing built-in extension DRI2
[ 12.175] (II) LoadModule: "glx"
[ 12.176] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/modules/extensions/libglx.so
[ 12.176] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 12.176] compiled for 6.9.0, module version = 1.0.0
[ 12.177] Loading extension GLX
[ 12.177] (==) Matched fglrx as autoconfigured driver 0
[ 12.177] (==) Matched ati as autoconfigured driver 1
[ 12.177] (==) Matched modesetting as autoconfigured driver 2
[ 12.177] (==) Matched fbdev as autoconfigured driver 3
[ 12.177] (==) Matched vesa as autoconfigured driver 4
[ 12.177] (==) Assigned the driver to the xf86ConfigLayout
[ 12.177] (II) LoadModule: "fglrx"
[ 12.177] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/modules/drivers/fglrx_drv.so
[ 12.312] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 12.312] compiled for 1.4.99.906, module version = 13.35.5
[ 12.312] Module class: X.Org Video Driver
[ 12.313] (II) Loading sub module "fglrxdrm"
[ 12.313] (II) LoadModule: "fglrxdrm"
[ 12.314] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/modules/linux/libfglrxdrm.so
[ 12.316] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 12.316] compiled for 1.4.99.906, module version = 13.35.5
[ 12.316] (II) LoadModule: "ati"
[ 12.319] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 12.320] (II) Module ati: vendor="X.Org Foundation"
[ 12.320] compiled for 1.15.1, module version = 7.5.99
[ 12.320] Module class: X.Org Video Driver
[ 12.320] ABI class: X.Org Video Driver, version 15.0
[ 12.320] (II) LoadModule: "radeon"
[ 12.321] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 12.338] (II) Module radeon: vendor="X.Org Foundation"
[ 12.338] compiled for 1.15.1, module version = 7.5.99
[ 12.338] Module class: X.Org Video Driver
[ 12.338] ABI class: X.Org Video Driver, version 15.0
[ 12.338] (II) LoadModule: "modesetting"
[ 12.339] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 12.339] (II) Module modesetting: vendor="X.Org Foundation"
[ 12.339] compiled for 1.15.0, module version = 0.8.1
[ 12.339] Module class: X.Org Video Driver
[ 12.339] ABI class: X.Org Video Driver, version 15.0
[ 12.339] (II) LoadModule: "fbdev"
[ 12.340] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 12.340] (II) Module fbdev: vendor="X.Org Foundation"
[ 12.340] compiled for 1.15.0, module version = 0.4.4
[ 12.340] Module class: X.Org Video Driver
[ 12.340] ABI class: X.Org Video Driver, version 15.0
[ 12.340] (II) LoadModule: "vesa"
[ 12.341] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 12.341] (II) Module vesa: vendor="X.Org Foundation"
[ 12.341] compiled for 1.15.0, module version = 2.3.3
[ 12.341] Module class: X.Org Video Driver
[ 12.341] ABI class: X.Org Video Driver, version 15.0
[ 12.341] (II) AMD Proprietary Linux Driver Version Identifier:13.35.5
[ 12.341] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-13.35.1005
[ 12.341] (II) AMD Proprietary Linux Driver Build Date: Mar 12 2014 10:32:19
[ 12.341] (II) RADEON: Driver for ATI Radeon chipsets:
Code:
[ 12.361] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 12.361] (II) FBDEV: driver for framebuffer: fbdev
[ 12.361] (II) VESA: driver for VESA chipsets: vesa
[ 12.361] (++) using VT number 7
[ 12.361] (WW) Falling back to old probe method for fglrx
[ 12.396] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 12.464] ukiDynamicMajor: failed to open /proc/ati/major
[ 12.467] (EE) No supported AMD display adapters were found
[ 12.468] (II) [KMS] drm report modesetting isn't supported.
[ 12.468] (EE) open /dev/dri/card0: No such file or directory
[ 12.468] (WW) Falling back to old probe method for modesetting
[ 12.468] (EE) open /dev/dri/card0: No such file or directory
[ 12.468] (II) Loading sub module "fbdevhw"
[ 12.468] (II) LoadModule: "fbdevhw"
[ 12.469] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 12.470] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 12.470] compiled for 1.15.1, module version = 0.0.2
[ 12.470] ABI class: X.Org Video Driver, version 15.0
[ 12.470] (**) FBDEV(2): claimed PCI slot 1@0:0:0
[ 12.470] (II) FBDEV(2): using default device
[ 12.470] (WW) Falling back to old probe method for vesa
[ 12.470] (EE) Screen 0 deleted because of no matching config section.
[ 12.470] (II) UnloadModule: "radeon"
[ 12.470] (EE) Screen 0 deleted because of no matching config section.
[ 12.470] (II) UnloadModule: "modesetting"
[ 12.470] (II) FBDEV(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 12.470] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[ 12.470] (==) FBDEV(0): RGB weight 888
[ 12.470] (==) FBDEV(0): Default visual is TrueColor
[ 12.470] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 12.470] (II) FBDEV(0): hardware: VESA VGA (video memory: 3072kB)
[ 12.470] (II) FBDEV(0): checking modes against framebuffer device...
[ 12.470] (II) FBDEV(0): checking modes against monitor...
[ 12.470] (--) FBDEV(0): Virtual size is 1024x768 (pitch 1024)
[ 12.471] (**) FBDEV(0): Built-in mode "current": 78.7 MHz, 59.9 kHz, 75.7 Hz
[ 12.471] (II) FBDEV(0): Modeline "current"x0.0 78.65 1024 1056 1184 1312 768 772 776 792 -hsync -vsync -csync (59.9 kHz b)
[ 12.471] (==) FBDEV(0): DPI set to (96, 96)
[ 12.471] (II) Loading sub module "fb"
[ 12.471] (II) LoadModule: "fb"
[ 12.472] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 12.472] (II) Module fb: vendor="X.Org Foundation"
[ 12.472] compiled for 1.15.1, module version = 1.0.0
[ 12.472] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12.472] (**) FBDEV(0): using shadow framebuffer
[ 12.472] (II) Loading sub module "shadow"
[ 12.472] (II) LoadModule: "shadow"
[ 12.473] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 12.473] (II) Module shadow: vendor="X.Org Foundation"
[ 12.473] compiled for 1.15.1, module version = 1.1.0
[ 12.473] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12.473] (II) UnloadModule: "fglrx"
[ 12.473] (II) Unloading fglrx
[ 12.473] (II) UnloadSubModule: "fglrxdrm"
[ 12.473] (II) Unloading fglrxdrm
[ 12.473] (II) UnloadModule: "vesa"
[ 12.473] (II) Unloading vesa
[ 12.473] (==) Depth 24 pixmap format is 32 bpp
[ 12.473] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 12.474] (==) FBDEV(0): Backing store enabled
[ 12.474] (==) FBDEV(0): DPMS enabled
[ 12.474] (==) RandR enabled
[ 12.495] (II) SELinux: Disabled on system
[ 12.499] (EE) GLX error: Can not get required symbols.
[ 12.526] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 12.533] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 12.533] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 12.534] (II) LoadModule: "evdev"
[ 12.534] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 12.536] (II) Module evdev: vendor="X.Org Foundation"
[ 12.536] compiled for 1.15.0, module version = 2.8.2
[ 12.536] Module class: X.Org XInput Driver
[ 12.536] ABI class: X.Org XInput driver, version 20.0
[ 12.536] (II) Using input driver 'evdev' for 'Power Button'
[ 12.536] (**) Power Button: always reports core events
[ 12.536] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 12.536] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 12.536] (--) evdev: Power Button: Found keys
[ 12.536] (II) evdev: Power Button: Configuring as keyboard
[ 12.536] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 12.536] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 12.536] (**) Option "xkb_rules" "evdev"
[ 12.536] (**) Option "xkb_model" "pc105"
[ 12.536] (**) Option "xkb_layout" "de"
[ 12.543] (II) XKB: reuse xkmfile /var/lib/xkb/server-808BBA3D4C227BDB44C370226C34E44C5D69A4A9.xkm
[ 12.545] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 12.545] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 12.545] (II) Using input driver 'evdev' for 'Video Bus'
[ 12.545] (**) Video Bus: always reports core events
[ 12.545] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 12.545] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 12.545] (--) evdev: Video Bus: Found keys
[ 12.545] (II) evdev: Video Bus: Configuring as keyboard
[ 12.545] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input5/event4"
[ 12.545] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 12.545] (**) Option "xkb_rules" "evdev"
[ 12.545] (**) Option "xkb_model" "pc105"
[ 12.545] (**) Option "xkb_layout" "de"
[ 12.547] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 12.547] (II) No input driver specified, ignoring this device.
[ 12.547] (II) This device may have been added with another device file.
[ 12.547] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 12.547] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 12.547] (II) Using input driver 'evdev' for 'Sleep Button'
[ 12.547] (**) Sleep Button: always reports core events
[ 12.547] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 12.548] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 12.548] (--) evdev: Sleep Button: Found keys
[ 12.548] (II) evdev: Sleep Button: Configuring as keyboard
[ 12.548] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 12.548] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 12.548] (**) Option "xkb_rules" "evdev"
[ 12.548] (**) Option "xkb_model" "pc105"
[ 12.548] (**) Option "xkb_layout" "de"
[ 12.549] (II) config/udev: Adding input device Razer Razer Diamondback 3G (/dev/input/event6)
[ 12.549] (**) Razer Razer Diamondback 3G: Applying InputClass "evdev pointer catchall"
[ 12.549] (II) Using input driver 'evdev' for 'Razer Razer Diamondback 3G'
[ 12.549] (**) Razer Razer Diamondback 3G: always reports core events
[ 12.549] (**) evdev: Razer Razer Diamondback 3G: Device: "/dev/input/event6"
[ 12.549] (--) evdev: Razer Razer Diamondback 3G: Vendor 0x1532 Product 0xd
[ 12.550] (--) evdev: Razer Razer Diamondback 3G: Found 11 mouse buttons
[ 12.550] (--) evdev: Razer Razer Diamondback 3G: Found scroll wheel(s)
[ 12.550] (--) evdev: Razer Razer Diamondback 3G: Found relative axes
[ 12.550] (--) evdev: Razer Razer Diamondback 3G: Found x and y relative axes
[ 12.550] (II) evdev: Razer Razer Diamondback 3G: Configuring as mouse
[ 12.550] (II) evdev: Razer Razer Diamondback 3G: Adding scrollwheel support
[ 12.550] (**) evdev: Razer Razer Diamondback 3G: YAxisMapping: buttons 4 and 5
[ 12.550] (**) evdev: Razer Razer Diamondback 3G: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12.550] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input8/event6"
[ 12.550] (II) XINPUT: Adding extended input device "Razer Razer Diamondback 3G" (type: MOUSE, id 9)
[ 12.550] (II) evdev: Razer Razer Diamondback 3G: initialized for relative axes.
[ 12.550] (**) Razer Razer Diamondback 3G: (accel) keeping acceleration scheme 1
[ 12.550] (**) Razer Razer Diamondback 3G: (accel) acceleration profile 0
[ 12.550] (**) Razer Razer Diamondback 3G: (accel) acceleration factor: 2.000
[ 12.550] (**) Razer Razer Diamondback 3G: (accel) acceleration threshold: 4
[ 12.551] (II) config/udev: Adding input device Razer Razer Diamondback 3G (/dev/input/mouse1)
[ 12.551] (II) No input driver specified, ignoring this device.
[ 12.551] (II) This device may have been added with another device file.
[ 12.552] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 12.552] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 12.552] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 12.552] (**) AT Translated Set 2 keyboard: always reports core events
[ 12.552] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 12.552] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 12.552] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 12.552] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 12.552] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 12.552] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 12.552] (**) Option "xkb_rules" "evdev"
[ 12.552] (**) Option "xkb_model" "pc105"
[ 12.552] (**) Option "xkb_layout" "de"
[ 12.554] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
[ 12.554] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 12.554] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 12.554] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 12.554] (II) LoadModule: "synaptics"
[ 12.555] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 12.555] (II) Module synaptics: vendor="X.Org Foundation"
[ 12.555] compiled for 1.15.0, module version = 1.7.4
[ 12.555] Module class: X.Org XInput Driver
[ 12.555] ABI class: X.Org XInput driver, version 20.0
[ 12.555] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 12.555] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 12.555] (**) Option "Device" "/dev/input/event5"
[ 12.720] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 93)
[ 12.720] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 125)
[ 12.720] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 12.720] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 12.720] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 12.720] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 12.720] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 12.720] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 12.750] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event5"
[ 12.750] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 12.750] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 12.750] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 12.750] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 12.751] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 12.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 12.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 12.751] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 12.751] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 12.752] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 12.752] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 12.752] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event8)
[ 12.753] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 12.753] (**) TPPS/2 IBM TrackPoint: Applying InputClass "trackpoint catchall"
[ 12.753] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 12.753] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 12.753] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
[ 12.753] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 12.753] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 12.753] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 12.753] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 12.753] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 12.753] (**) Option "Emulate3Buttons" "true"
[ 12.753] (**) Option "EmulateWheel" "true"
[ 12.753] (**) Option "EmulateWheelButton" "2"
[ 12.753] (**) Option "YAxisMapping" "4 5"
[ 12.753] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 12.753] (**) Option "XAxisMapping" "6 7"
[ 12.753] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
[ 12.753] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12.753] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input7/event8"
[ 12.753] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input7/event8"
[ 12.753] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 12)
[ 12.753] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 12.754] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 12.754] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 12.754] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 12.754] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 12.755] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse2)
[ 12.755] (II) No input driver specified, ignoring this device.
[ 12.755] (II) This device may have been added with another device file.
[ 12.759] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event7)
[ 12.760] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 12.760] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 12.760] (**) ThinkPad Extra Buttons: always reports core events
[ 12.760] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event7"
[ 12.760] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 12.760] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 12.760] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 12.760] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input9/event7"
[ 12.760] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
[ 12.760] (**) Option "xkb_rules" "evdev"
[ 12.760] (**) Option "xkb_model" "pc105"
[ 12.760] (**) Option "xkb_layout" "de"
[ 12.770] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 41.501] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 41.639] (EE) FBDEV(0): FBIOBLANK: Invalid argument
Sind jedenfalls weniger "invalide argumente" da.
Traditional Avatar by Darksittich
(Dieser Beitrag wurde zuletzt bearbeitet: 23.01.2015 von Crash Override.)
|
|
|
23.01.2015 |
404compliant
GalaCon Volunteer-Stratege
Carrot Not Found
Beiträge: 8.345
Registriert seit: 23. Okt 2011
|
RE: Von Windows auf Linux - die Umsteiger
Hast du den install- und den recofigure-Aufruf auch gemacht?
Code:
sudo apt-get install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-core
sudo dpkg-reconfigure xserver-xorg
Multiarch scheinst du nicht zu haben, es bleibt also bei den einfachen Aufrufen.
|
|
|
23.01.2015 |
Crash Override
Faust
Beiträge: 14.545
Registriert seit: 10. Feb 2013
|
RE: Von Windows auf Linux - die Umsteiger
Hatte ich auch gemacht - schön schritt für schritt. Das, was "sudo less /var/log/Xorg.0.log" ausgegeben hat, war nach dem kompletten Prozedere und dem Neustart (bzw. den Neustarts, da beim einfachen restart die Usb-Anschlüsse nicht reagierten - und somit weder Maus, noch Trackpoint oder UMTS-Stick was getan hatten). Sozusagen ist dass das, was seit dem Neustart "funktioniert" (oder auch nicht).
Traditional Avatar by Darksittich
|
|
|
24.01.2015 |
404compliant
GalaCon Volunteer-Stratege
Carrot Not Found
Beiträge: 8.345
Registriert seit: 23. Okt 2011
|
RE: Von Windows auf Linux - die Umsteiger
Seltsam. Ich bleibe bei meiner Theorie, irgendwas verhindert, dass der Kernel die Grafikkarte übernimmt und per KMS steuert. Leider kenne ich das System nicht genug, um zu wissen, wie der fglrx-Treiber das in dem Fall bewerkstelligt.
Unter Debian legt der installierte radeon-Treiber unter /etc/modprobe.d/radeon-kms.conf eine Kerneloption ab, die modesetting für Radeon-Karten aktiviert. Ob es noch einen vergleichbaren, entgegen gesetzten Mechanismus gibt, den der fglrx verwendet, um sich durchzusetzen, weiß ich nicht.
Auch könnte der entsprechende Punkt, zu dem KMS sich abschaltet, schon in der init-ramdisk sein, dann müsste auch die regeneriert werden, um den Spuk zu beenden. Vielleicht steckt dort immer noch der fglrx-Kerneltreiber drin.
Schwer, irgend welche weiteren Tipps zu geben, ohne Zugriff auf das System, zumal ich nicht mal ein ähnliches Vergleichssystem hier habe.
Wird echt Zeit, dass der fglrx-Treiber eingestampft wird.
|
|
|
25.01.2015 |
Maglor
Great and Powerful
Beiträge: 269
Registriert seit: 22. Apr 2014
|
RE: Von Windows auf Linux - die Umsteiger
(24.01.2015)404compliant schrieb: Unter Debian legt der installierte radeon-Treiber unter /etc/modprobe.d/radeon-kms.conf eine Kerneloption ab, die modesetting für Radeon-Karten aktiviert. Ob es noch einen vergleichbaren, entgegen gesetzten Mechanismus gibt, den der fglrx verwendet, um sich durchzusetzen, weiß ich nicht.
Befindet sich ebenfalls in modprobe.d und nennt sich als Eintrag z.B. "blacklist radeon"
Meistens in der /etc/modprobe.de/modprobe.conf bzw /etc/modprobe.d/blacklist.conf zu finden.
Fest einschreiben würde der Philosophie und dem Grundgedanken widersprechen.
Dieses existiert schon seit geraumer Zeit nicht mehr für die externen Grafiktreiber.
Daher geht man dort den Weg des blacklistens.
Bei unsauberen entfernen, passiert es häufig das ein blacklist Eintrag schlicht "vergessen" wird.
Einzig Matrox macht dieses noch für ihre Grafikkarten mit ~10-20 Anschlüssen. (Genutzt für Videleinwände)
Würde am liebsten paar Dinge mehr zur Problemlösung schreiben... jedoch muss ich erst den Thread durchlesen, sobald ich Zeit für finde
|
|
|
25.01.2015 |
Crash Override
Faust
Beiträge: 14.545
Registriert seit: 10. Feb 2013
|
RE: Von Windows auf Linux - die Umsteiger
Kein Problem, lass dir Zeit. Vielleicht kommt man so wieder nen schritt weiter.
Traditional Avatar by Darksittich
|
|
|
25.01.2015 |
404compliant
GalaCon Volunteer-Stratege
Carrot Not Found
Beiträge: 8.345
Registriert seit: 23. Okt 2011
|
RE: Von Windows auf Linux - die Umsteiger
Ein Modul-Blacklist könnte es vielleicht auch sein, die dmesg-Ausgabe sieht mir erst mal aber nicht so aus. Ein lsmod|grep radeon sollte es uns verraten.
Die Datei, die ich erwähnt habe, entspricht dem Kernel-Parameter radeon.modeset=1, unter Debian ist der Voraussetzung dafür, dass der xorg-Treiber läuft.
@Crash, mach doch auch mal ein sudo grep -r radeon /etc , vielleicht finden wir so irgend welche Hinweise.
|
|
|
|